Sinista32

I was just being a whinger - it's fine as is

because 1. Its where the View new content button was. Pain to get used to 2. Likely a good reason why there is no reply. -> Spam, Troll, yes there are Stupid questions, and finally no one had a good answer. 3. There is over 470 pages. So if it stays can we start from today?

"view unreplied topics" annoys me please remove

Its always good to use the vspec placard on the standard GTR due to rim/tyre size

Sounds like your after the originals But if you want aftermarket ones for your GTR R32 contact John at Trojans. or get them from RAWS online

Line

Yep - screws are short stubby and go straight into the metal. Should be able to find something suitable at bunnings

You've probably worked it out small screw at the door handle side on the inside - remove with a phillips head use a long screwdriver under the trim and lift it up - will save it from flexing the trim or bending it there are metal clips that hold it down but they will open and allow the trim to come up the 4 white things you can see hold the felt bushes against the window, not part of the securing of the trim While its out clean the felt bushes as this is what causes the glass scratching up and yes for install just slide it under at small angle and push the trim back into place do the small screw up.

sorry to see

would be nice de-badged, a stock colour etc... Stealth imagine the shock of the unknowing

Straya day folks, Enjoy Get your bogan on and enjoy your day.

-9's

somebody you know and who knows what you were doing

I think I have seen your RB26 head out there Theo. You have some nice parts going in

Just answering off OP's question of dropping the motor out

R32 GTR runs without the IC pipe like an NA (Maf less). Quite fine R34 GTT runs like an NA (slightly worse) with the Turbo rooted. No boosting.. R32 GTSt runs like shit with IC pipe popped off. likely a high flow is your best option

For $800 no. Be lucky to have an R+R for under $2000. PITA to do twins Go Single Will make future life a lot easier. The modern singles are better than the older twins. IMHO. (Speak with John at Trojans to get a good idea)

Yes It could be a vacuum hose. if it happened all of sudden after a pop! sound.Check your Intercooler and the pipes that join there.

parting out ???

Nistune - Try again Edit: Repalce wastegate if it cant hold pressure and as said above whats the go with the OP6 Highflow

Anf has one with 3 small holes for a gauge near the radio buttons. He's also has one in his GTR so ask which one he wants to keep.

Buy the side vents and cut your 32 front bar up to fit. That's what it looks like to me. The sides and front lower lip look bolt on.

Welcome. Good to know.

must be Summernumpty's Pink 33 going up and down a street in Kambah being a complete clown car sounds shit too edited!

Ditto