JTCC

Got them from someone on Facebook. Here is what I know about them. Old offer from omori. http://www.nismo.co.jp/omori_factory/news_list/news_20150709_2.html

finally received my last little tidbits of parts to go ahead and finish up. Got the right hubs for the new wheel bearings. little hicas nuts sway bar bolts New OEM hood moldings also Does anyone have any idea what this faded out sticker looks like? I would like to get a new one if at all possible. I also intalled the Omori Factory shift boot and ebrake boot. Went ahead and put in the N1 radio delete pocket as well. Kind of sucks though because the previous owner installed tweeters by the side view mirrors and im pretty sure they have ruined the door panels underneath. So I left them on lol. At least that looks finished compared to random bad spot on the panel. They are kind of hidden from outside view anyways. Also, got a new house. Nice having my ride in my own garage so I can do whatever. Most of the time, just starring at it lol. Have my own little JDM parts dungeon, all s13 and r32 parts lol Also, obviously got to test drive! Car feels very nice. Very smooth and planted. The nismo diff is pretty sweet. Instant hookup. Car stays much straighter when braking traction or launching hard etc. I used to get a smidge of torque steer when I would shift and chirp second etc. Not now, it still chirps but it just keeps going lol. The noise is a little shocking at first, always sounds broken etc. But it still needs to be broke in a bit. I've only put maybe 50 miles on it. Also, clutching in on tight slow turns takes all the popping away lol. Very fun car to drive, feel very confident in it.

Few more things while waiting for the other stuff to ship in. Got to move the car to pull it on the lift. All I have to say is, the nismo LSD is very talkative. It pops, bangs, chirps etc. Probably will break it in and move onto some Motul fluid as I've been recommended. Need something with some friction modifier to quiet it down. But the diff definitely "works" lol. Like someone is trying to escape out of the trunk using a hammer. While up on the lift, the steering rack bushings and front sway bar endlinks were changed out. Nismo bushings on left, OEM on the right. They really weren't in bad shape at all, neither was most of the bushings etc I've replaced. Previous owner took care of this car pretty well or its just because he only put 49k miles on it in 25 years. The nismo bushings are definitely a lot stiffer though. While on the lift gave me time to snap a few pics of the rear. Then it was time to install the Nismo trunk floor support bar. Kind of a qwerky piece but interesting. Not sure on how much it really stiffens things up, but the R32 is a car that needs all the bracing it can get. I believe the R34 had these designed into them from the factory. I believe the late model r33 had some kind rear bracing and also the S15 silvia got an OEM rear trunk bar. So apparently they do a little something for stiffness. But anyways, here it is Kind of a cool little piece, Im happy with it after install. Had to trim the rear paneling and make holes for the bolts in the carpet to keep a clean install. Didn't turn out to bad

Ok have some more updates. Used a new shim and the diff landed at .005 inch. Was happy about that lol. Thats the bare minimum but it will work. Tested the contact patch on the teeth and it was in the center. So should be good. Then it was time to rebuild the rear axles with new boots and grease. Very messy job, so not many pics lol. OEM boot kits are great slopped in some new grease So with those done it was time to reassemble. Assembled the 1000 piece sway bar endlinks lol All back together. Bled the Attesa etc. back on the gound! Always a good feeling haha Its not completely done, still waiting on a few odds and ends. Lost some nuts, forgot some nuts haha. All on order. Little things tend to happen along the way. Got a new battery. Kind of hard shape and size to find over here in the USA. We have much bigger posts than the little japanese ones. But I managed to find a battery shop that carried something that will maintain OEM appearance with no work needed. Even though its a Chinese battery. But it seems more than adequate. I bought a nice new battery charger/tender also, so it should be ok. Very close to OEM size Also picked up a new washer bottle. Which happens to be a nismo heritage part. They only make the N1 so it has one spray motor. But I dont use my wipers or washer fluid. So it didn't bother me much, I just wanted some new plastic. I already have the overflow reservoir and the old washer bottle was throwing off the look lol. Should have a few more random updates next week hopefully. Waiting on parts.

I order from the nissan dealership. Cheapest I've found anywhere. No international shipping either lol. I either just type the part I'm looking for in Google and see what pops up. Usually some place will have a part number listed. Or I find the diagrams and look up part numbers. If you know someone with nissan Fast, they can look up part numbers for you by typing in your vin.

Lol it's not to bad. There are some pretty extreme builds out there. I'm just more of an OEM+ kind of guy. I want to keep the car a r32 GTR so to speak. Not trying to make some track monster. I want to keep the car somewhat relevant to what it was in its era. But still improve it in minor ways.

Ok been a while, been busy with work etc. Was out of country for about 3 months lol. Finally got some time to get some stuff done. Lets see here, got a few new items. Reinik cam cover baffles Nismo carbon mirror cover Nismo floor bar Omori Factory shift and ebrake boots dropped the rear subframe to commence restore/updates. disassembled the diff Had pieces cleaned/powdercoated The fun job of pressing in the Nismo bushings and new hicas ball joints Nismo GT Pro LSD put in. Sadly, I need new shims, I was at .002 mm of backlash. 3 thousandths to tight. It calls for .005-.007 Time for subframe reassembly with nismo arms and new OEM hardware. Sadly, I ordered the wrong 5 lug hubs so they wouldn't fit into my new wheel bearings. Working on getting that straightened out. I ordered the NA version, when I needed the turbo version. Dumb mistake on my part. So the old hub assemblies are in for now. Still have more stuff to do before its all finished up and ready to bolt back up. But here is the progress so far. Will update soon hopefully lol.

Not trying to necro an old thread, but this info is wrong. Since this thread pops up when you do a search, I'd figure I'd comment just in case anyone else is searching. Don't want false info being spread. The side with the half circles go up. The side that is grooved out goes down. Just like the OEM bushings. Although the OEM bushings have bigger cutouts than the nismo. I can post pics if needed.

I agree with Duncan. We dont have GTR historical race shops over here lol. All we have is word of mouth. There are a few shops that know what they are doing for sure. But USA is quite large. Be prepared to trailer your car long distances. Luckily I live in the center of the country. So I'm half way to everywhere lol. I know rebuilding a engine isn't some crazy new science. But everyone does things a little different. Plenty of shops have their little secrets and I'm sure Omori knows a few and for some reason, the rb26 seems to be that kind of engine where there is all kinds of he said she said "mods" that make it "better". First I have to say that I definitely understand that nismo stuff is a little pricey for what you are actually getting. They are not claiming to be the best at anything. But I still have never had a nismo part that didn't fit like a glove. The hardest part I would say was the inlet pipes, but that is just a tight cramped area to begin with. Once it was all in etc, it fell together perfectly. Mine did not hit the hood or the intake box that they supply spacers for just in case. They pre-warn you about ANY fitment issues saying you may have to cut here or here. They did their homework and testing for you and put it in the directions (that is for all of their parts). You are paying for all of that. Generally, nismo makes a nice product and its kind of a OEM+ factory based item. I would probably only do a nismo crate engine if I lived in Japan. Its more of an in house thing where you sit down and get the build you want. I hear omori engines are very smooth and responsive. They have there own tricks, dont let the little spec sheet on the internet fool you. They've had their rolls in GT, touring cars and super taikyu. They are not for the monster, I'm trying to be the coolest 800+ hp build with big single EFR turbo type people. Its just a clean responsive 450-500 hp build all with genuine/nismo parts and documentation. Its a street car that can be taken to the circuit type stuff. But realistically Omori also does full chassis and interior refresh. You can basically get a brand new GTR. Your wallet is the limit. Not enough people read their blog. I still have not seen anyone come close to Omori cleanliness. Not saying they are the best of everything, but its more so of having the experience and a factory backed shop. You know without a doubt the work is being done correctly and to spec if not exceeding. But again, you pay for it. There are other nissan based dealerships that do great work also. Prince Tokyo for instance. They do general maintenance on joe blow micra, or full out GTR race builds. Now me personally, I'm only shooting for whatever my turbos allow safely on 93 AKI pump gas (98 ron). I'm suspecting 500hp to be the absolute max. Which is why I'm not touching the internals until I absolutely have to. But I will try to take every precaution to help longevity that I can. I think tuning will be the main factor.

haha the parts dungeon. Not very well lit either

Thanks. The battery is what it came with from japan. Looks oem to me. I have no catch can installed yet. Its basically an OEM engine with basic bolt ons that I put on. I have a pile of parts for when its time to pull the motor. That will probably be the next step after I get all this suspension taken care of and installed. But I have the nismo oil/air separator that I'll be using.

Nismo GT L.S.D pro 1.5 way rear diff

Endless BMC stopper New OEM rear wheel bearings, hubs, nuts, washers, bolts, sway bar end links, brackets etc. Plan on doing a pretty hefty refresh since I'll be dropping the subframe for all new nismo bushings/arms. Nismo GT L.S.D pro 1.5 way adjustable rear diff

continued from above got a flare lol Tomei metal turbo manifold gaskets and Greddy magnetic drain plug New CV boots for the rear axles Someone took a cool picture OEM shipment for hotside New OEM water/oil feed and return lines with HKS banjo bolts OEM turbo gasket kit and Nismo metal intake manifold gaskets New OEM studs, washers, bolts, nuts for turbo manifolds/turbos etc

Haven't updated in a while. So here goes. Got new window/door retainers and moldings. Mine aren't in terrible shape, just wanted to get new ones. New sway bar end links for up front New overflow reservoir Installed the Nismo Circuit link pro up front with the front and rear sway bars How it looked before alignment. I ended up getting around -1.8 degrees up front and -2 degrees in the back 5.5 degrees castor i think. Cant remember. I bought these Greddy/Grex brakes like 12 years ago for my 240sx. Haven't really ran them so I decided to put them on the GTR for now. They match the advan RG well. 4 pot aluminum calipers, 330mm 2 piece rotors with duralumin gold anodized bell housings, Earls teflon lined stainless braided lines.

New tomei valc cams Anyone seen or have real world experience with the new tomei valc cams?

Also waiting to see what these will cost once they finish testing them lol. Look pretty sweet to me. Supposedly for all GTR models. For use with nismo tension rod though.

Did they only make r34 one? I cant seem to find them on the website for any model. I've been on the fence about one for the 32. I know attain makes one. Curious to see how nismo would design one if they made it. Your's looks pretty clean and tasteful.

Those are what was released when I made that post a few weeks ago about some mystery new carbon parts for display. Kind of thought they would be. Was hoping for a omori/nismo carbon lip though. Something that has a nismo plaque or something centered on the lip. Not sure if I like the carbon pipes after having my aluminum ones. I kind of like the aluminum look, but I will probably bite the bullet and grab a box. Had my importer price one for me about a week ago or so. A buddy told me about it being for sale after visiting Omori Factory. I found out after I bought those Omori LMGT4, just didn't feel like dropping that much coin in one day lol.

Bnr32, carbon intake pipes also. Forgot the exact yen amount. Around 200,000 yen

9.1 kg. 20 lbs that's pretty decent for 18x10.5

Box is already out. 517,000 yen.

Wheels came in. Very nice, glad I bought them. Pretty light weight also. Also got these cool cars for my Dad for Christmas. He collects rare/expensive hot wheels and other toy car brands. I thought these were pretty cool. Group A collection set.

Very nice quality. Very light weight. Really pleased. Very smooth finish.

Yes, it's so much better! Its like perfect height for me. I said that as I was driving it lol.