boothy_99

I was sure they fit, was just curious if their guts were the same? I know some 32GTR's had the push clutch, but many also have the pull type.

If above sale of seats falls through, I have good condition factory stagea seats available plus cash if reqd. I am in Perth too.

If above sale of seats falls through, I have good condition factory stagea seats available plus cash if reqd. I am in Perth too.

If above sale of seats falls through, I have good condition factory stagea seats available plus cash if reqd. I am in Perth too.

Will the 32gtr item work too, and is it interchangeable?

Will the 32gtr item work too, and is it interchangeable?

Hi Team I have tried searching for this, but there seems to be alot of back and forth, no real definitive answer.... I have a 2000 model, series 2 RB25DETneo factory AWD manual stagea. The gearbox has a whine in every gear but 4th, and when sitting in nuetral clutch not depressed (countershaft bearing) because it ran with no oil for a short time. Instead of getting it rebuilt, I just want to put another gearbox in it. My question is, what gearbox is interchangeable!? I assumed they ran an R33GTR gearbox? As It has the rest of the 33gtr drivetrain and rear end following it? My blue plate indicated a code of * FS5R30 RC41 if that can indicate anything specific?

Hi guys I think I am the first to post up the results of a Mamba brand turbo. The unit is fitted to my series 2 Stages RSFourS RB25DET-Neo. I took the plunge and contacted Eiji directly for my purchase and couldn't be happier. The dyno results speak for themselves, I will be sticking it back on the dyno to get the 300rwkw I was chasing, and it looks very achievable. Tuned by the wizard himself Dec's from Garage 7, he had to stop the tune early due to the clutch losing its ability to hold the power, a standard clutch was never going to cut the mustard. New clutch ordered and it's almost guaranteed I will be making a post in the '300kw unopened club' thread.. So, see below. RB25DET-NEO Manual Stagea RS4S KPM Motorsport StreetFighter Bosch 1000cc 3/4 Length injectors Pump 98 Fuel walbro 460lph in-tank fuel pump Mamba GTX3076 turbo with .82 rear housing HDI FMIC, customised into return flow setup Hybrid Low Mount Manifold, Customised external gate outlet Synapse 40mm External Wastegate (screamer outlet) Full 3" exhaust, decat and 2 mufflers Power FC for R34 with Squirrel trick

Hello guys I am more after pictures here, I bought a Mamba GTX3076 turbo kit, which came with a universal Oil and Water line kit, I can see that I will need to replace the oil feed fitting in the block to adapt to AN fitting (-4 I think) but I didn't get it in the kit, anyone know where I can get one from in Adelaide? Also, anyone show what they have done with their water lines, I got solid ones which are about 20cm long, with barbed engine fitting, I cannot see how they can join into any where. I would be after peoples pics with Kinugawa kits if possible, as they are similar. Cheers

Willing to negotiate a bundle deal, or make an offer, worst I can say is no!

Still available guys

uppy up up

Still for sale, cheap!

BUMP! Injectors come with spacers still for the same price!!! You wont find brand new 550cc's this cheap!

Does anyone know if they produced fake Synapese Synchronix gates? Anyway to decipher if one of them is a fake or not?