Boostn247

will this bolt onto series 1, rb25det? if so, interested~

FMIC & BOOST IT! THEN you'll fly everywhere! Wheels not really necessary @ this point in time! Stereo can be built along the way!

98 GTR FRONT COOLER for sale Located - NSW $350.00 ..... In great condition Silver in Colour, no resttrictions NOT A COPY! Off original gtr r33... 3" in/Outlets Can send aust.wide Pm me if interested!

any suggestions, pls!

Hi Guys, my rb25det has a terrible idle problem! when in neutral @ the traffic lights, my car usually idles @ around 700-800 rpm...last week or so, its been dropping to a point where the car practically stalls, ALL MY REDS show up etc, & under slight acceleration(load) in 2nd & 3rd gear, the car hesitates, jerks & actually begun to misfire like a gun shot last night dropping gears from 3rd down to 2nd?? My mechanic checked & replaced spark plugs...checked EMS, everything fine, no problem showed up.. He was charging me $80 p/hr to figure out the problem, & i have now taken the car home, cause he couldn't find out my problem & i cant throw money @ him to still have my car shit! WHATS HAPPENING?

**SOLD** Awaiting Payment...

pms sent pics you will have in the morning boys!

is this turbo a straight on bolt up to the stock r33 rb25det.. if so , send pics to boostn247@hotmail.com

yea, ill take one of these for my project car..PM me for more pmt details. cheers!

GTR FMIC $ 350 O.N.O Tube & Fin design, NOT A COPY...Off original GTR .. Able to hold great PSI, 3" IN / Outlets... Pics can be sent, PM me interested.. Located in Wollongong NSW... Postage is max $15.00 anywhere in OZ.

SOLD

will this bolt up exactly with the stock gtr tube & fin fmic.. if so, im very interested, send some pics to boostn247@hotmail.com

ok, thats fine, thanks!

O.M.G rofl! u f*cks!

Thanks so much all you guys,, Im printing all this off to take home with me & the prep job ill be starting tomorrow arvo witha couple of mates, ill post pics of my current car & paint job then finish results too... One other question...If i start to sand back the gloss etc & bog up the small dings etc, then primer etc, am i still allowed to drive the car? Like get it dirty, & or wet, what happens etc if it rained, or should i keep car in garage, sand the whole car back, drive or tow it to spraypainter, & let him finish it off, cheers boys!

hey guys.. I have pretty much nil experience when it comes to panel beating, bodywork, spraying etc but I do have a free garage spot & some time so I figured I'd give it a go, To save my spraypainter & some money stripping the stock colour back for a respray! My car is a black HR31 Import Passage the 4 door (Charcoal Black with the grey underskirts round the car).. Basically I want a sharper, newer Black with a maroon tinge mixed in with the black to get a different effect in the sunlight. Maybe with a pearl mixed in. The colour I have now is a your standard charcoal black etc which I'm not really a big fan of. It's not a complete colour change so I'm going to leave the engine bay for now since it's nicely detalied & in good nick along with the boot & door jams etc... What's the basic run-down of tools and materials needed? What grades of sandpaper should I use to rub my car back? Can you just paint a paint stripper on, wipe that off, bog up any dints then sand it back? Can anyone recommend any good resources websites to give me a helping hand? I want a really deep (if that makes sense) shiny paint job so I'm prepared to put in the hard yards with preperation work and lots of coats.. For the record my cars body is pretty much 100% straight (like 1 or 3 pin dents) with a tiny bit of surface rust near a 2 of my window sills. A friend said he'd help me take care of those so bodywork isn't really an issue it's just rubbing back/prepping/spraying I wanna know about.

yes, id like to know the same!! ;-)

is this a straight bolt on fit to replace the standard turbo & manifold on teh rb25det? interestd..

what does this do for your turbo'd car!?

Im after someone to airbrush a jet flying @ night with some nice back flames coming out of the motors across water @ night! my car is black...or any other suggestions on what i should get airbrushed! Who here knows or would do this...I have cash & want it down asap! If so, PM me or attatch something to this thread, cheers!

yea i got one, $30 he can have the whole lot, will cover everything your mate needs, PM ME!

woops, sorry, delete if necessary...

Link from a website for ET racing Fuels www.etracingfuels.com says they have released a range of unleaded race fuel that can legally be used on the Street. Best thing is that already in Sydney there is 1 service station that has it at a Pump, and there is about 7 or 8 in the near future that will be stocking it. Flip side is, that it will cost $3.85p/Litre. Hopefully when they open it up at more service stations the price might drop a little but for a track day or something it would be good 20 Litres for just shy of $80.00. There is no odour from the fuel when burnt so no give away odour like normal race fuel The address for the Petrol Station is ET Petroleum at 47 Lakemba St, Belmore NSW.

Thanks for having me come round the other night, then coming to mine!!! The car is sweet, & the NOS setup is what ill end up copying, pretty much the same style etc, talk soon adrian !

whats your email? do u have any pics, im interested~