adam wicks

The iac has 3 little ports and 1 big one, the big goes between the throttle body and cooler, what 3 little ports do I use and block ?

The iac has 3 little ports and 1 big one, the big goes between the throttle body and cooler, what 3 little ports do I use and block ?

Hello RB lovers I'm currently installing a plenum for my r34 and have a couple questions. Firstly 1. What hoses go to the iac?

Need some help ASAP thanks

Yea what ever it is

The lead that connects to the coil packs

Coil pack leads

The owner said he washed it one day and it just starting do it so he replaced the leads coils and plugs but the problems still there, he said once it heats up it will idle on its own

Okay thanks, can you do an ecu check like you can one other rb's?

Also no error codes showing

Okay I'm looking at this r32 gtr it starts really easy no problems turns over first time but won't hold idle. You need to give it some revs other wise it just turns off. Just wondering if someone could give me any ideas what it could be the car is stock as a rock the coil packs lead and plugs have been replaced

It flutters I was just seeing if it could dose

Can't you a metal intake pipe In front of the turbo to make it dose ?

Has anyone done this ?

It was working fine when I took it out because I had to change the bulbs in the speedo, after doing that and putting it back together I turned the lights on and some in the left corner of the speedo (fuel gauge) didn't light up, later I went for a drive and about 30 seconds of driving my power steering went heavy. The speedo works all good apart from the bulk behind the fuel gauge. I borrowed a mates speedo cluster and put it in and my power steering worked without a problem

Nissan skyline r32 gtst speedo isn't sending signal but works ? It's making my power steering heavy because it's not getting a signal. Is there anyway to fix this

Put the old one back in and it is still heavy

Okay thanks so it would be a sensor because the speedo works ?

Is there a way I can test if the sensor on the column is stuffed ?

If it was a sensor would the power steering always be heavy ? It's fine until I start driving

Nissan skyline r32 gtst 1993 replaced speedo how power steering is heavy after about 30 seconds of driving. Speedo works and steering is fine on start up. Need help please I've looked everywhere to fix this problem

Bump

Both driver and passenger rails no use in my 32 as the rails are different The rails where on bride low max seats when I got them. Could be modified to fit after seats

And can you text the sensor on the column ?

The dash all works so could it be the speed sensor ?