The lock bar was installed by the last owner so I'm not sure but I've owned the car for about a year and never had a problem till I replaced the cluster, I'll do the diagnostics and see what happens, I did an ecu diagnostics and it was all okay
The sensor appears to be fine
Can I test sensors some how ? If so how ?
How do I do a hicas diagnostic test ? (Can I google it )
The cable is the genuine one that was factory fitted
I have back tracked a few times but no luck
I looked at the sensor on the column it seems to be all fine
I couldn't find the sensor behind the dash
All the connections are all good
My car is a 1993 gtst
I recently replaced my speedo cause the other broke in my Nissan skyline r32 gtst 1993. The new speedo all works, when the car is started the power steering works fine but after a little drive for about 30 seconds if that the steering goes heavy?
I've had a read about some sensor but I have no idea where it is and what to do about it ?
Any help would be great thanks
Where did you put it ?
Also I'm talking about when you open the door then close it everything inside the door sounds loose and rattly
And also when your driving with the windows down the doors rattle and squeak
Okay so I own a r32 gtst and I've had some gtr centre din guage sitting around for agers and decided I'd put them in my gtst. Has anyone down this and how hard is it ?
I need help wiring it up
Any help would be great thanks !
O-O\Skyline/O-O
So my Nissan skyline r32 never starts first turn over cold but always first second turn over it pretty rough start but always starts none the less. sometimes it starts first time when hot.
When I turn the key I hear my fuel pump turn on (walbro 255)
The motor cranks and I can hear the starter motor turning over but can't hear the engine firing
Any help would be awesome thanks !
So my Nissan skyline r32 never starts first turn over cold but always first second turn over it pretty rough start but always starts none the less. sometimes it starts first time when hot.
When I turn the key I hear my fuel pump turn on (walbro 255)
The motor cranks and I can hear the starter motor turning over but can't hear the engine firing
Any help would be awesome thanks !