Jump to content
SAU Community

Dan260z

Members
  • Posts

    7
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Dan260z

  1. Sweet thanks - took a look though and can't see a listing for a full kit for R34 / RB25DET NEO? Just Heater hose (4) and Radiator (s) hose kits. Mainly just need the smaller hoses all over the engine, as I'm rebuilding it atm and would like to replace all the rubber while it's out. And it's not going in a skyline so the radiator and heater hoses wont suit.
  2. K so bitten the bullet and just got a VL RB30 kit for $38 - the listing said it included a bunch of 30mm and 22mm plugs along with some others - majority of mine measured 30mm and 22mm so I know it'll cover at least most of the plugs I need.
  3. Slightly confused - do any of these kits cover all the water hoses, including the small hoses used in and around the engine itself, through various heating blocks on the intake manifold, Oil cooler near the filter, etc on an R34 RB25DET NEO? I'm chasing one, pref in black.
  4. Anyone got a listing of all the sizes required for block and head? Or found a kit?
  5. WTB: NEO Engine cover, Coil pack cover, and Turbo cover/sheild (no dents). Prefer perfect condition, but can deal with poor condition if cheap enough. If you have fasteners, etc too that a bonus but not important. Location: Melbourne 3082
  6. Chasing a NEO turbo engine cover, Coil pack cover, and Turbo cover/sheild (no dents) - able to help out? Would need postage to Melbourne 3082
  7. Hi Guys, I'm building up a project 260z and am looking to put either an RB25DET NEO or VQ35 in it. Idea was to get a complete wreck so i can take my time and make sure I get everything I need, then part out the rest. This is especially important if I were going the VQ35 route, as I'll need all the electrics (ECM, BCM, key, key tranposnder, looms, etc) because of NATS. While I prefer a complete car, I'm open to the idea of buying an RB25DET NEO engine and ECU/loom by itself (and/or gearbox). Tired engines needing rings replaced, etc are ok providing the price reflects that and it's otherwise complete. (plenty of blocks coming up on ebay... by the time I source all the other bits it'll probably cost more than a good complete engine!) Cash at the ready...
×
×
  • Create New...