paultesp

That would explain things -- as we're back to the original symptoms. i think I've been referring to the G35 guide... face palm. Will get the right side replaced and keep posted. Ta.

Yep, same code as before.

Hi all, Three weeks ago my GT 350 V35 stalled and at which time the SLIP, VDC off and check engine lights came on simultaneously. I did the following: -ECU reset procedure which cleared the error -- but then the error came back after the car been on for about 10 seconds. -ECU diagnostics mode which gave me the error p0340 -- Camshaft Position senor -- which should be the passenger side (left for Aus, NZ, Japan etc) -Ordered the replacement part and installed it, ECU reset procedure again -- everything seemed ok... After doing the above -- the lights were back to normal (no errors) and performance had noticeably improved; however, after turning the car off then back on again, the lights are back on... Any ideas? Note: If i repeat the ECU reset procedure concurrent times, i can drive the car without any issue (performance or apparent ECU errors) -- the light comes on immediately after turning the car off then back on again. It's like the ECU is reverting to a backup memory (similar to running/ start memory on CISCO equipment).... -Ta