Disclaimer: There's a lot of people recommending to do this mod, but I haven't seen any idiotproof guides on how to do it. I'm not saying this is the best way to do this mod, it's just how i've done it - and hopefully this will help others, even if they don't follow my way 100%.
Brief overview: The general consensus is that from Factory, M35 Stageas limit throttle to 30% for up to 3 seconds after releasing the brake pedal. This can prevent good launches/coming out of corners faster. By cutting the signal wire to the ECU, we can maintain full throttle immediately after releasing the brake. It is OK to cut this wire, however you will get a Check Engine Light after some time. By rigging it up to a switch, you are able to disable/enable the mod freely.
Behind the glovebox is the ECU. You will need to dissemble the passenger side interior to access this, there's other guides online on how to do this - so I will assume you have your glovebox out and are looking at the ECU.
Pull the plastic off guard off the ECU connector, it clicks off the 4 tabs on each corner.
Find the VIOLET wire with the BLUE stripe - you can see it in pictures 1 + 4 of this post. I cut this wire, and attached either side to a terminal block. You can pick these up from JayCar very cheaply - I used a terminal block because I don't trust myself to solder wires coming directly off the ECU.
I then picked up a small, discrete ON/OFF toggle switch (also from JayCar), which I mounted in my Glovebox - see pictures 2 + 3. Lastly just attach these wires to the remaining spots on the terminal block.
Test the switch while everything is apart - This way you can fix any problems before reassembling.
Done!
Picture 4 of this post explains the above if anyone is unclear.
Some people have hooked this up to the reverse switch in the car, so they don't have to touch the switch ever - however I like the idea of a toggle, so I can limit throttle power when a family member/friend drives the car.