ebellis

C34 LED Tail Lights Installed Ordered back in December and they finally got installed last week RizeJapan one off LED tail lights LED on the left, Standard on the right and a short youtube video to show all the different blinker/hazard patterns

http://www.masamotorsports.com/m34mc If you can't find a factory one, MASA Motorsports makes a 260rs style one ~50,000 JPY (~600 AUD)

previously posted pics of LED High beam install, had my guy put in some LED fogs while I was out of town a few weeks back, no install pics just in action Fogs with headlights off (just the daytime running light inside each headlight housing) All of the lights (factory low beams, LED fogs and LED high beams)

Installed LED high beams from Rize Japan, amazed by the design. Large heat sink, adjustable length and orientation of the LEDs, and even mounting points for zip ties on the small control box

Update: New accumulator installed, 4WD light still coming on but only once the car is sitting at a stop for a while. Restart the car and the light goes away as long as I'm driving. Next step will be to check the ATTESA control unit while the 4WD light is on to see what code it blinks out, but from some other internet research it sounds like it may be an issue with the G sensor, in which case I'll be looking at a Do Luck digital G sensor or just go for the full DTM II set up Bonus: Most recent outting with the Stagea to Daikoku PA unfortunately that R34 and FD got in the way of my shot

Atop Mt. Haruna (made famous as Mt. Akina in the Initial D series)

I'll try to grab a pic after work, its brown in color if I remember correctly. Found the diagram below, where it should be the part in the top left labeled " リレー "

speaking of switches, anyone know where to get a relay for the luggage fan switch? Mine seems to be missing

Replaced my center AC vents/trim with a fresh one from Yahoo auctions, wasn't necessary, but there were some small nicks and scratches on it when I got the car also bidding on a Carbing Okuyama rear tower strut bar and a Do-Luck rear crossbar

Update: So I learned the R33 GT-R ATTESA assembly is not a direct replacement, as the mounting brackets are different, however the pump and accumulator were able to be transferred over to the Stagea brackets. After replacing the pump and accumulator with some used parts there were still some issues, and upon further investigation my mechanic found a couple clogged points in the line, which may have caused the old pump to wear prematurely. Car is still not 100% but we think its the accumulator so we are sourcing a new one from Nissan

dropping it off tomorrow to get this installed, may go ahead and replace the accumulator while I'm at it

ah I see, I'm currently on Ohlin's shocks and I haven't noticed any weird sounds, however there were some marks on the shocks from the previous owner. I can't know if thats from the r34 wheels or wheels they may have had before

I don't believe I'm running any spacers on mine, but I've got 4wd model

turns out it is in fact the pump, so working on sourcing a used one, possibly from down under, and I'll likely replace the accumulator while I'm at it my mechanic also swapped the relay for me while it was there because he had a spare one laying around, but no change

whoops, my buddy informed me that the link for the pictures doesn't work so here ya go

Eventful morning, stayed up all night watching Real Madrid vs Atletico Madrid match, which ended around 7am local time. Since I was up I decided to make the short trip over to Daikoku to check out the Sunday morning fun. https://ebellis.smugmug.com/Automotive/Daikoku-2016-May-29/n-8q8m3P/ (On mobile now, but will put pics into the thread later) And a quick gopro video, wrist mount strapped to the passenger headrest seems to work well

I was thinking about that, is it ever actually the relay? If not I should probably just go ahead and start with the accumulator

Found the source of the clicking, was in fact the ATTESA Pump Relay, so first going to replace the relay and if its not that then next step seems to be the ATTESA pump and/or the accumulator

I fit pretty well in the back of my stagea Just needed a nice pillow and it would have been perfect for a nap

Congrats on the autech I picked one up in March. Just out of curiosity, I assume its fine, but is there any detriment or benefit to running the z32 afms with haltech?

wasn't quite $600 but they're essentially the Japanese equivalent of Snap-on, decided to splurge and call it an early birthday present to myself plus dat $20 replacement seat and new tools

Thanks for the info! Yeah I really do need to get a set, haven't really needed any since I moved to Japan went ahead and ordered a set from KTC https://translate.google.com/translate?sl=ja&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fwww.kpt.co.jp%2Fdetail_1.aspx%3FGId%3D14188%26MId%3D161%26FId%3D4%26SId%3D19%26TId%3D68%26FthId%3D194&edit-text=

Picked up a new driver seat today, happened upon it while checking out one of the local Up Garage locations...set me back a whole 20 usd anyone happen to know the stock rail bolt size, I'm guessing 12mm but wanted to double check before I order a wrench, may just go ahead and pick up a ratchet set though