rbpwrd240

Anyone have any info or maybe know an axle closer to 26.375 that has the 6x1 gtr flange and bigger gtr spline count. Thanks,

R32 GTR Axle Length I just got some R32 Axles out of a GTR. My plan was to use these on my S14 along with a S15 Helical Diff and R34 Helical Out put shafts. I do realize Ill need the Hubs from a skyline or Q45 or Z32 TT. My question is about the length of theh static axles because when I measured mine they came out to. 24.5" (62.23cm) 25.75" (65.4cm).The issue is that the 25.75" axle is supposed to go where a 26.375" axle was. Im worried about the missing .625". Can anyone verify the rear R32 GTR Axle length so I can make sure I have the right parts. Thanks, Alex R.

Im interested in the whole lot shipped to the United States. Even the oil cap if you have that too. Hows 200 AUD.... Let me know, Alex R.

No body.....

Please.... anyone have any input here.

Surely someone must know...

R33 RB25DET Clutch Identification I recently purchased a used Nismo Clutch pack out of an ECR33 Type M. I got it home and I was very excited but now my excitement is mild concern. I purchased the clutch out of Japan so all I had to go by was the pictures. After reviewing lots of photos I decided that the clutch in the photos was the Nismo Sports Clutch kit for the RB25DET. For reference here is a pic of the Nismo RSR21 Flywheel that I thought I was buying. http://www.rhdjapan.com/nismo-light-weight-flywheel-rb20-rb25-rb26.html When I looked at the one I bought it doesn't have any of the nismo markings but I figured it may have been resurfaced at one time so I weighed it on my crappy analog bathroom scale which put it around 16lbs. The Nismo RSR21 flywheel supposedly weighs just a bit over 15lbs so I was in the right area for weight but again this flywheel has no markings that say nismo. I looked at some factory flywheels and they dont have the conical dish in the center of the flywheel and they tend to have a bunch of balancing divits where this one only has two which is much more commonly found on the lightweight nismo flywheels. Pics of flywheel Front Pic of Flywheel Back The clutch disk is the only thing with any part number or markings and it says a four number code that ends with N14 on one side and it has the code RCD-205 on the other side. I thought this was the RB25DET Nismo Sports clutch but a quick search with the number code RCD-205 only brings up results for the SR20DET. Clutch Side One Clutch Side 2 To further complicate things it also appears that the pressure plate doesn't have any markings on it either. I think its the Nismo Pressure plate that comes with the Sport Clutch kit but I have no way to confirm this. Pressure Plate Can anyone confirm that these parts are indeed what I think they are or if they are actually factory stock parts for the RB25DET. I would appreciate it. Hopefully I have given enough information for someone to make an accurate call. Thanks in advance, Alex R.

How much for the rear brake calipers, rotors, bolts, splash guards, e-brake setup with cables and hubs shipped to the USA... Basicaly I need everything from the knuckle out. Thanks, Alex R.

Hope he is okay I never heard back either.... If anyone has info or can PM me a good contact number I would appreciate it. Cheers mates,

E-ECR33 Type M Brake Rotor Size? I am looking at purchasing some E-ECR33 Type M Calipers and I was under the impression that the correct rotor size was the same as the ECR33 GTS-T or 296mm x 30mm. The seller is under the impression they are the 310mm version. If he is correct the only other 310mm rotor I see used was on the R34 GTT Skyline which was 310mm x 30mm. To further add to my confusion one mate told me that they were the same as the R32 GTR rotors which I found to be 296mm x 32mm. Any input, thanks!!! Alex R.

Hope your doing okay I haven't heard back from our PM's in a while. Shoot me a message when you get this. Thanks, Alex R.

Heated Mirror switch available?

Is the heated mirror switch available?

How much posted to the USA?

Do you have a heated mirror switch? One with the defrost function and the folding function. Thanks, Alex R.

Let me know if you have a clean switch with clear symbols and how much you want. I need it posted to the USA. Thanks, Alex R.

Do you have the switch for heated folding mirrors? If so Ill take it. Thanks, Alex R.

Sry my mistake 78257 San Antonio,TX

Still waiting on price to US.

Willing to ship to the USA? If so PM me the price shipped. Alex R.

They are different signals but I figured I just need to match the boost sensor with the gauge. I haven't seen these for S14 so I wonder if the gauge is actually from a skyline DIN and the previous owner just used a skyline boost sensor. ??? Guess I will have to just wait and see.

Shipping to the U.S.?

Good Deal. I just got this one for my S14. http://page9.auctions.yahoo.co.jp/jp/auction/k210432811 I'm guessing it uses the OEM S14 Kouki sensor which I have, if by chance its actually an R32/R33 gauge that was swapt into the S14 DIN housing to read higher boost then I should just need the OEM R33/R32 boost sensor. Hopefully.... If it is an R32/R33 gauge will an RB25 sensor work or does it need to be a rb26 sensor? Thanks, Alex R.

Anyone running one of these? They go up to about 22PSI and don't have a negative pressure side. Also it says MINES on the boost gauge. If anyone is running one I would like to ask if you need to have the Mines Boost sensor or will it work on the factory Boost sensor? Im trying to figure out how it registered the higher boost levels on the gauge. Thanks, Alex R.

Hi, This is my first post but I am building an S14 with an RB25 with a 500whp goal. I had planed to use a gt3076r with a .82 6 bolt Nissan exhaust housing but I couldn't find one. I was able to find a .86 though that has the 6 bolt Nissan down pipe flange so I figured I would use that. However after seeing a similar setup in a picture its almost laughable. I was hoping the turbo would look a little less obvious. I thought the low mount would help hid things but it seems that even with a shroud the turbo looks massive and the 10mm spacer thats required pushes it even further out into the public eye. So I figured I would ask you guys what a good high hp sleeper status turbo combo would be. Thanks for any help and for having a great forum. Alex R.