Lethal26

Looks like spool 3.2l!! they seem to be pretty good and good results out there from their stroker kits.

Hi guys, just after rb26 stock bore block for sale?! NSW Cheers

8 weeks... not long enough lol

i will be getting the dyno paper tomorrow i will post it up!!

it was only on 22psi so wasn't making that much!!

So finally got the car done!! It made decent power.. 458rwkw @ 28psi Long story short the engine let go after 1 week Time for rebuild Power goal 600-650awkw I wan do things once not twice so Trying to decide between a stroker or stock displacement Head work Fuel system etc Basically any tips or help will much appreciated

Lasted 2 weeks so not bad... nah to be honest the car seem to be fine just finished it n got running after 1yr off the road plus jus paid full yr rego but shit happenes!! Now need to rebuild it hopefully it won't cost much lol

Well the motor let go happy days lol

?!

Afr

ECU is the new adaptronic modular m6000

Here is my results R33 GTR stock head apart from arp head studs n tomei type b valve springs n retainers gtw3884r 62mm 1.00 ts 6boost ts t4 mani turbosmart 60mm gate 3.5" tbe 100mm fmic bosch 1000cc walbro 460 turbosmart v2 1200 458rwkw @ 28psi

Sydney condition is good

I have a set of splitfire coilspack for r34 gtr $350 Cheers

$350!!

Can you pm his details? i have been very busy with work didn't get much time to work on it. Also wtac this weekend so hopefully sometime next week I will do some work on it. Also waiting on a new oil temp sensor as I've deleted the oil/ heat exchanger. Rocker covers and intake getting painted next week. Hopefully a week or 2 and everything will be done. Good choice on the turbo bit expensive good luck with everything... everyone seem going with bw8374 the response is amazing!! How long until you will finish with your car? cheers

The cheapest I could find was 1200 for those injectors!! Also I end up getting 60mm gate instead of the 50mm.

How much they are roughly? thanks

Just wondering if the Bosch 2000cc injectors would fit in stock rail?!

Anyone?!

Different turbo now!! GTW3884r 62mm with 1.00 rear housing!! Head getting serviced so hopefully everything should be on the car by next week :))

R34 gtr splitfire coil packs R34 gtr splitfire coils packs mint condition hardly used will swap for r33 gtr splitfire coilpacks $450ono 0428627195

Hey everyone!! As you all know once you buy a GTR you will end up broke but that's the fun of it hehe Well it's a 33 gtr, just recently the hg let go after getting it tuned!! All the car had is a full exhaust and adaptronic ecu. So it's time for upgrades :))) So far I got the stock twin turbo off and pretty much I broke every single pipe bolt etc ( it was a night mare). Now slowly taking the intake side off and then head off!! Mod list: Bw s300sxe (8376 - 62mm) ts .91 Ts 6boost mani Turbosmart 50mm ext pro gate 3.5" tbh (no cat) 4" intake pipe avcr boost controller or I can use the ecu to control the boost ( which one is better) fmic 100mm 3" intercooler piping Bosch 2000 cc injectors (any issue using them on e85) walbro 460l fuel pump ( thinking of going 2 in tank pump setup) turbosmart fuel reg tomei hg 87 bore and 1.2 thinkness with intake n exh as well tomei type valve springs arp head studs tomei 1.5 oil restrictor new radiator and also all the hoses are getting changed im getting the timing done with all the seals etc setting up an oil catch to control the oil better. hopefully will reach the 400kw as the motor still stock but will see how far it will get to before it blows up. i will be taking pictures as I go so hopefully everything will turn out to be good. any suggestions or tips to help please let me know. i hope you guys enjoy it thanks

Thanks Geoff

Thanks for the help Harris racing that's exactly what I'm after