ADM33T

Once I take the cover off I should be able pin point it better I think. Just trying to gauge what I should be looking for.

ummmmm.......good question. Are the idler pulleys generally part of the kit for the timing belt or they are purchased separately ? If they are purchased separately then I would say no they may not have been done.

Hi All, So hoping to be pointed in the right direction before I go opening things up. So here are the symptom's: Upon start up after approx. 4-6mins of normal idle there is like a "grinding noise" that comes directly behind the CAS and on top of the cover, when it is there you can also feel the vibration of the cover kind off. it happens intermittently so it could be there for like 10secs stop then after 1min it come back for like 30sec then stop and so on and so on. it goes away when the throttle cable is pulled and revs increases, release the cable then its back with in 20-40secs. it only does it after it has warmed up from a fresh start. Also to add the water pump and timing belt has only been replaced approx. 6 weeks ago. Hoping to be pointed in the right direction of what to look for when I open the cover up. Thanks.

Hi Paul, Looking at purchasing a set of YJ for R33 S2. I'm looking at running between 14-22psi through my new set up, now the obvious response from experienced RB owners is to purchase "S**** F***" blah blah blah I've read mixed feedback not to mention you standing by your product 100%. Are your coils suitable to run and will they hold up to the higher psi range I will be pushing? Thanks.

Location Daveo?

Looking for a hi flowed turbo for a direct swap in my R33 S2. Located Sydney metro. PS may have posted same add in "forsale" section by accident.

Still forsale?? Does the Apexi have the hand controller?