Sic1978

wow thanks guys! i so should have joined earlier! im a UK chap and if im honest i rate you aussies as the best guys for skylines. Great products, great advice and mostly hilarious how to videos on youtube! i've been lurking in the background stealing your info for a while. yep you have read it correct that is how i have it setup and its nice to know im all good there. that p-gain advice is great, nowhere does it mention this in the Engrish translation manual. it also confirms why when i had my gain at 0 and p-gain at 0 whilst not an ideal setup, behaved well. its also nice to know i havent gone off the reservation with my settings, you would think you were asking about someones mothers vagine in the uk the amount of responses you get on this subject. thanks again guys, and (sadly for you) as a result you will hear a lot more from me i have a set of Gen7 celica seats i am going to do a fitting guide for at some point to give a little back. Cheers guys!

Hi guys how are we all? I have a blitz sbc type s (single solenoid with the dinky lil finger conntroller) I cannot get it to behave itself for love nor money. Im not after mega figures just a stable 10 psi ish. It is installed correcly as far as i know (e.g it works) my solenoid is tapped in as close to the turbo as pos maybe 6" of hose on both pieces solenoid attached to wheel arch with dampening washers so im not living with zebedee. The controller itself tho takes its feed from the plenum but does share the line with the boost gauge and turbo time. I have full vacuum. Now then im currently playing with 2 setups. My low is currently set 35, gain 5, p gain 0 which i know isnt great i get around 9.5 psi of boost but it does drop off a bit. My high setup is something like set 30, gain 20, p gain 15. That is a bit off its head in 4th and 5th it gets 9.7 and kindo holds but in lower gears im getting spikes up to 11.1 which obviosly sets my warn and back off (20) off and never hits high boost correctly. Im basically fairly sure my engrish manual is.......weeeelllllll vague. If i follow the manual i set my boost (35) then adjust gain to allow the turbo to spool and thats it overboost as soon as i put 5 in. I cannot find anybody else's settings for love or money, or even if im doing it right. Its all just sooooooooo vague!! Am i to expect a certain amount of overboost? Any help/example settings gratefully recieved!

Also i unfortunately dont live anywhere near anyone who knows skylines or this type of tuning.

Hi guys, newbie from the UK here. I imported my own r33 skyline from japan last year, so far ive swapped the exhaust out 3" from the turbo back, fitted GTR intercooler, all strut braced and roll barred out with whiteline bits. Now ive got the handling sorted out im very pleased with the car. Now then to tap you guys up for some information I have a blitz sbc type s (single solenoid with the dinky lil finger conntroller) I cannot get it to behave itself for love nor money. Im not after mega figures just a stable 10 psi ish. Now then im currently playing with 2 setups. My low is currently set 35, gain 5, p gain 0 which i know isnt great i get around 9.5 psi of boost but it does drop off a bit. My high setup is something like set 30, gain 20, p gain 15. That is a bit off its head in 4th and 5th it gets 9.7 and kindo holds but in lower gears im getting spikes up to 11.1 which obviosly sets my warn and back off (20) off and never hits high boost correctly. Im basically fairly sure my engrish manual is.......weeeelllllll vague. If i follow the manual i set my boost (35) then adjust gain to allow the turbo to spool and thats it overboost as soon as i put 5 in. I cannot find anybody else's settings for love or money, or even if im doing it right. Its all just sooooooooo vague!! Am i to expect a certain amount of overboost? Any help/example settings gratefully recieved!