Jump to content
SAU Community

hugh jaynous

Members
 View Profile  See their activity

  • Posts

    54

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by hugh jaynous

  1. hugh jaynous
    Rechecked and both are 4 pipes still all small on de and 3 1 det
  2. hugh jaynous
    I've read some where around here that the de neo run Det non neo rods etc. IACV is different between the two, de bigger and is 3 small pipes connecting, Det is two small ones and a large one.
  3. hugh jaynous
    ah....i never thought about this, since i just snipped the two auto connectors and spliced the 3 wires to neutral/reverse/inhib and then taped the other cables back without making sure they didn't touch another cable, potentially some of those cables are actually contacting each other now.
  4. hugh jaynous
    i guess to clarify the explanation a bit, all the lights light up, but only one brake light + high lamp is properly functioning ie; when off the brake pedal and the pedal switch is fully pressed down in contact with the pedal that one light is dimmed while the other 3 show no change as if im still stepping on the brakes. I'll try to poke around with a multimeter now, but if by some stroke of genius there's some other thing possible missed im all ears, thanks!
  5. hugh jaynous
    just got around to doing an auto to manual swap in an r34 gt to gtt manual box, auto dash shows N in neutral and reverse in reverse lights beeps, speed, rpm temps etc all work. BUT now brake lights semi work and don't work. The furthest left light and the high brake lamp work, the other 3 are permanently on, no idea if these 3 run off a different circuit? Makes no sense but ill probs try anything at this point lol.
  6. hugh jaynous
    I do believe Uras has one that mostly fits up to it, that section in the center with the skyline lettering has a very slight gap and the sides are a bit finicky to line up. May be a me problem for the side fitment since mine is semi stretched out to mate up to wide fenders. The one on mine is an aliexpress copy if i remember right, its been years lol.front.jfiffront2.jfif https://www.rhdjapan.com/uras-gt-lip-front-lip-spoiler-carbon-fiber-skyline-er34-zenki.html
  7. hugh jaynous
    Price? Depending on pricing, may still be interested in one. I have recently grabbed a digital dash as well so this item isn't super high up on my priorities any more.
  8. hugh jaynous
    Title says it all y'all 😅 definitely a shot in the dark but maybe some thing will come up with y'all awesome peeps?
  9. hugh jaynous
    GTSboy is correct, the shift logic should make no difference if your vehicle is already a GTT from the sounds of it. The shift logic is seperate in the auto NA ecu vs the GTT auto ecu which is together. From what others have said it makes more headaches for the NA auto ecu > +t with Auto GTT ecu and nistune as there would be two shift control units in the car.
  10. hugh jaynous
    that's a decent thread to reference for the "squirrel" trick, it's taking that reference pin and supplying the 5v source to the 3 other pins. The diodes roughly drop the voltage about .6v per diode so just roughly do the math listed in the thread to get the output you need for each pin.
  11. hugh jaynous
    time to go grab some then, thanks!
  12. hugh jaynous
    Just wondering if these will need conversion lines brake lines? They're the 2 pot opposed piston calipers, car already has internal ebrake. Doesn't look like the banjo bolts on the current set up want to fit into the z32 rears, just tried to fit them and the banjo bolts are extremely long and don't seem to want to fit nicely. I believe the z32 shares the rears with r33 gtst and r32 GTR. Thanks everyone !
  13. hugh jaynous
    i did not.......and now i am expecting the car to explode oil at some point....no leaks at the moment though so I'm praying no problems for the mean while.
  14. hugh jaynous
    Gates belt, was tensioned using two turns on crank and a bit more, leaving me with about 1/4 turn twisting the belt. Pump, tensioner, idler was all done as well.
  15. hugh jaynous
    Just wondering it it's possible to adjust tension after you've finished putting everything back? Can i just take off the fan, belts, CAS, upper cover and re-tension? Car sounds like its got a super charger and bothers the crap outta me and makes me fear a snap one of these days at high rpm. Thanks guys.
  16. hugh jaynous
    just running off the base gtt map from nistune I'm guessing as well ? also where did you grab the pressure source for the waste gate? and last but not least any plans on a boost gauge ?
  17. hugh jaynous
    Nice, coming along really smoothly for your car! How long was you oil feed? I'm going to be teeing it off the oil pressure sender so just wondering what lengths and how much slack/extra there was for you guys.
  18. hugh jaynous
    Nice, time to do direct voltage mod while your at it for constant voltage or else that pump will be very unhappy. I've also seen alot of kits use the 342 pump over the 341 but as you can see either will work. Im slowly reaching the point of all parts ready to go on too, got most of the piping stuff and oem tubby for under 600 all together.
  19. hugh jaynous
    PM Sent
  20. hugh jaynous
    Still up for sale?
  21. hugh jaynous
    Pm sent
  22. hugh jaynous
    Those prices are amazing.
  23. hugh jaynous
    You guys are all lucky in terms of costs for this conversion haha. the cost of a good condition det motor in Canada is at the very least 1500+ and potentially double for the manual tranny attached. The cost of me swapping to a gtt in better condition than my current setup is also gonna set me back 3-5k at least assuming I can get market price 10k and a decent gtt for 13-15k. I honestly also feel the same way aleks feels about the car, in that I also pretty much wanted to learn and loved the car before the conversion talks. the exhaust part I also got done essentially subbed the original exhaust stuff a little in front of the cat to a 2.5 all the way through to a borla muffler at the end car sounds mean but quiet enough while crusing.
  24. hugh jaynous
    Yep definitely got the ecu last night! 135 for ecu is a steal! also I saw that but probably thought it was too small by the picture! looked tiny till I remembered AN12 would be about the size of the the 3/4 adapter. I thought about the angled adapter not pointing right as well but I feel it would definitely help with gravity drain.
  25. hugh jaynous
    That's what I thought too, but those fittings are rare from what I have been able to find for a 3/4 bspt to AN 10 or 12 at a 45 angle. Straight ones I've yet to see as well. I've seen alot of people using 3/4 npt and some Teflon tape to ensure that the fitting doesn't come undone instead of bspt but if easier to just get npt i will make do I guess.
×
×
  • Create New...