TOKKŌ TAI

Gidday folks Have just swapped a31 cefiro from rb20 to rb25 s1 using the rb20 loom and ecu. All I done with the swap is change over the injector plugs and used all the rb20 sensors (cas afm coils etc) . I left unplugged the aacv, coldstart, oil pressure sensor, and vct. What I've tested Test spark, has spark Test light in injector plug has pulse Rotate cas by hand with one injector plugged in can here it clicking Swap coils Swap spark plugs Swap injector Check for compression, has compression Check intake manifold gaskets they are good. No. 6 is not firing at all doesn't make a difference if coil or injector unpluged From here I am lost for what to check. Its like it loses spark as soon as the coil is bolted to the head, the timing is off for just that cylinder or the loom was pinched during the swap... I'm unsure any help is appreciated

Hey there lolkong for info. On the r32 gtst I believe the manual and auto yokes have the same spline. The difference between them being the outside diameter of the slip yoke that fits into the box. The auto one is larger can I get it machine to fit the manual geatbox Has anyone done this

But it looks like the auto one is the correct length

Just asking if anyone can tell me the size of the mising bolt from the shifter plate. And also there is a spring missing from under said bolt. What is the use of the spring? Thanks Cameron

Hey there just wondering if I can put just the manual yoke pictured onto the existing uj of an auto drive shaft it is for RB20DET small type gearbox Thanks Cameron

Hi i have an a31 cefiro rb20det. the engine oil light is always on and the rpm counter doesnt work at all. I have changed the dash cluster and it hasnt changed. Does anyone know what it might be and could it be related. Thanks

Yes i have been driving it for the last two weeks and who knows how long the old owner drove it makeing that noise.

Hi everyone i dropped the oil i couldnt see any copper sparkles or anything in the drain tray but i tapped the oil filter and some sort of fine white almost cloudy specs where in the comminng out of the filter maybe thsts normal i dont know

Lifters i thought drove it 1000ks home. Noise hasnt changed oil is clean

20201114_113631.mp4

Hello i recently purchased this vehicle with a rb25det neo (4wd motor with gtr pull type clutch)that has a knocking/ticking sound. I got it at a good price and drove it home 6hours. The old owner who was an elderly person said the car sat for 3 years and was only started once in a blue moon, during that time it was said the sound occurred. The best way i can describe it is when you start the car for the first time in the day there is a louder knocking sound which then quitens slightly after 2 seconds and continues making that knock noise no matter the engine temperature. It also doesnt seem to change under load and only gets faster with revs. It sound like it is comeing from the rear of motor. Also when turning the engine over by hand it gets to a point where it is hard to turn over. I h ave added new hpr 10 oil and mbl8 to no change. I have it booked in somewhere but it is hard to find a place what wants to try diagnose it without stripping down the engine. I just cant do that right now. Any answers and advice appreciated. Thanks Cameron 20201109_190545.mp4