mr 32

money sent today. any problems let me know. details have been pm'd thanks mr 32

good day. great fun dingo again sorry bout your car, but remeber i wasnt driving it then.

can i get payment details thanks mr 32

yeh i went down to bunnings before but i dont know what section i was in, that place is so big now. thsts a good idea the tighter the fit the better you dont want them to come off mid slide

too much effort. i tried the duck tape on the rear wheels was not to bad got it sliding a bit.

here you go steve got this off randy

yeh but my rims are 110mm.

ok just got back from 3 hardwares and a plumming suply store and i couldnt fin pvc anywhere near the size of my buggy rims. so it looks like i will have to duck tapping over the rubber. any other ideas would be good. and is just the rear tyres or do you change all? thanks mr 32

i had the same problem i had a faulty fuse the one near the battery, and looking at it, it wasnt broken.

you need to go to a speedo cable shop and they will be able to rest everything for you, they will do a wind test will driving and see how far out it is. i can recomenned someone if your in sydney.

can i get one to or is it to late?

if you want im near bankstown i can find out how to tune them and if you want i can bring it around.

i can bring one of those laser temp. guns if someone knows how to tune nitro's mr 32

nah the mini z is only rwd but the diff has been locked

i was planning on bring the buggy, but never drifted the buggy before but i made my suspension very stiff and will change my super soft road tyres for something a bit harder. i dont think the mini z has enough power to drift on paved areas (just look at its size) but i will prob bring it along for a laugh. all the nitro cars, what nitro % do you run? PS. does any one have some spare body clips i could borrow?thanks mr 32

this is my buggy. mp6 sports. i also have some pics of my indoor drift pig, has a bit of damage. im not sure if i should bring it along aswell. mr 32

ill check my car tonight (i think i brock a servo) but i should be going either way i got these directions of whereis.com is there anywhere where i cant pay the toll by cash? SOUTH WESTERN MWY, REVESBY 14.94 km GENERAL HOLMES DR, MASCOT 1.11 km SOUTHERN CROSS DR, MASCOT 5.79 km DOWLING ST, KENSINGTON 484 m EASTERN DISTRIBUTOR MWY, KENSINGTON 4.26 km CAHILL EXP, SYDNEY 824 m SYDNEY HARBOUR TUNNEL, SYDNEY 2.74 km WARRINGAH FWY, NORTH SYDNEY 870 m FALCON ST EXIT, NORTH SYDNEY 274 m FALCON ST, NORTH SYDNEY 648 m MILITARY RD, NEUTRAL BAY 2.27 km SPIT RD, MOSMAN 3.01 km MANLY RD, SEAFORTH 789 m BURNT BRIDGE CREEK RD, SEAFORTH 1.71 km CONDAMINE ST, MANLY VALE 2.37 km PITTWATER RD, BROOKVALE 797 m WINBOURNE RD, BROOKVALE 274 m At the ROUNDABOUT - take the 2nd exit onto WINBOURNE RD, BROOKVALE 486 m RD, BROOKVALE 49 m ABBOTT RD, BROOKVALE 550 m Finish: Stop at ABBOTT RD, BROOKVALE 0 m ill post up some pics of my buggy later thanks mr 32

Was a great day, thanks Steve for orginising the day and all the effort you put in for the day. also thanks to Charlie for the drinks a life saver on the day. also to everyone else that helped out. mr 32

i though it might be the afm itself. but it could be the wiring as it doesnt happen all the time. and some times it is hard to start with out giving it a bit of a boot.

im not sure. i will check if they run coil packs

you have to remove the bar that holds them down from inside the boot. get into the boot remove the cover where the battery is and look up from under the parcell tray. you should see the original speaker holes. there should be a par that runs across the lenght of the speaker hole that is contected to a bolt which is connected to the speaker. it should be held in place by a wing nut remove this the bar should come off and now you should be able to remove the speaker. mr 32

my mate just bought a gtir and he has a problem at 4000rpm it just dies like it hasnt got spark or fuel, it doesnt stall but loses all power. just changed the spark plugs and leads and gapped them to 0.7. made no diffrence has any one had any experanice with this? thanks mr 32

the stuff i used came from the usa i can get the specs but for 1m of 2inch it was about 700aus and 1m of 3inch was about 1200aus i think the dollars was about 65c us at the time. if you know what you want i can get you a price from the wholesaler if you want.

i agree with the falken ziex being one of the worst tyres around,lost it a few times under no throtle in the xr when it would ran, not much better in the dry. i run goodyear eagle f1's now best tyres i have used also have used goodyear revspecs also very good and well priced. for the gtr next time i will get f1's. ring goodyear in bankstown 9790 3919 and ask for david tell him norm sent you will look after you. mr 32

i dont need 6 thats why i said 3 on the left. because i find it hard to see the apexi with pillar mount gauges. and beacuse the 3 gauge din centre will be removed for the rest of the audio setup