Jump to content
SAU Community

RBW49N

Members
 View Profile  See their activity

  • Posts

    204

  • Joined

  • Last visited

  • Days Won

    2

  • Feedback

    0%

 Content Type 

Everything posted by RBW49N

  1. RBW49N
    Bit the bullet and R34 fronted my unicorn. 😃
  2. RBW49N
    Brake upgrade for C34 AWD with 14mm calliper bolts. Comes with callipers, pads, discs, hoses and rotors. They are 4 piston Nissan callipers I suspect they are S14/15 but I do not know and I also do not know what else they will fit. Pick up from western Sydney or I can post if you want to pay for it but I’m sure postage wouldn’t be cheap. $250. I would also swap them for some Stagea stuff I need the clips in the rear for the blind and net
  3. RBW49N
    Pedal feel is very good. I thought I would need the BM57 master but it’s fine without it. I will upgrade to the bigger master cylinder when I do the rears. it stops great. One of the more noticeable mods I’ve done
  4. RBW49N
    I went from this tiny brake upgrade to the Evo Brembo and 350mm rotor brake upgrade on the weekend. What a difference.
  5. RBW49N
    Did you do a TK test?
  6. RBW49N
    Just make sure it has NEO cam covers as that’s why the bolts are different. The gasket on NEO covers is different as well
  7. RBW49N
    I have one in Sydney it has bulkhead terminals on it and the stock terminals/plugs are still intact and not melted.
  8. RBW49N
    TS astra 2001ish
  9. RBW49N
    Some outback’s are rated to 2400kg. Crazy I know but rated to that
  10. RBW49N
    A 2.5 na c34 would be lucky to pull the skin off a bowl of custard
  11. RBW49N
    Are they the same as a GTR?
  12. RBW49N
    That’s a great way to get car time. “I can’t come inside I’m cooking. “ I’m “cooking” the Turkey at the moment 😆
  13. RBW49N
    It must be from the ecu itself as I have a haltech and have been past 200 no issues. Still have the stock dash and the ecu was seeing the speed over 200
  14. RBW49N
    Just be American take the shit noisy fan off put a 12nch thermo because it’s better then complain your car overheats
  15. RBW49N
    If you haven’t changed the CAS it could be that but it sounds like cam timing and as Ben says if the ecu has been changed it means it probably not the ecu
  16. RBW49N
    Is it a series 2 rb25 or a series 2 Stagea?
  17. RBW49N
    A manual Stagea won’t work properly as it will need to be from a NEO or an RB26. You could possibly use an R33 gtst ecu auto or manual. Either way AWD won’t work. But the auto one might work the gearbox. What issues are you trying to fix?
  18. RBW49N
    https://www.willtheyfit.com/index.php?width=235&aspect=40&diameter=18&wheelwidth=9.5&offset=25&width2=235&aspect2=40&wheel_size=18&wheel_width=10.5&offset2=20
  19. RBW49N
    I’ve never done a Stagea before but some cars you can just put a small cut in the carpet behind the dash so it can be removed and then put a Velcro strap in to hold it together when reinstalling. I need to do mine at some stage as well does anyone know of any people doing aftermarket carpet for them yet. Or if R33 GTR fits the front half?
  20. RBW49N
    So long as it’s connected to boosted air not just open as that will cause it to run a bit funny as well idle will still be good. How big is the throttle body? 66mm
  21. RBW49N
    How did you hook up the idle motor?
  22. RBW49N
    Looks good. I noticed the slight rust in the joins are you using any sort of dust treatment before you lock it all in with paint?
  23. RBW49N
    @Dose Pipe Sutututu this guy obviously regrets trading his 33 for a euro trash box. Don’t do it.
  24. RBW49N
    All I see here is more time for DCT conversion not lack of track time
  25. RBW49N
    No old people can always wind their keyboard it’s attached to their computer with a cable because they can’t figure out how to pair a wireless keyboard to it
×
×
  • Create New...