Jump to content
SAU Community

frakzz

Members
  • Posts

    66
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by frakzz

  1. I want to understand the HKS recommendations for power and rpm. in addition, the crankshafts have different hardening layer thicknesses (different technology). for step1 layer 0.2-0.3mm and for step2 1mm
  2. hks wrote my friend also has an hks crankshaft, he did not do any machining of the crankshaft and I saw the same photos on the Internet. he has a box with the date 04/05. step2 is written on it it weighs 22kg and looks like this I also found this message also on yahoo japan other crankshafts, more machining, think weight 20kg can't define, it's all confusing I think to lighten the crankshaft by 2-3 kg, but I don't know if it's worth it.
  3. stroker used, coated pistons, coating left on the sides, they seem to be step2 I'm more interested in the crankshaft) a seller in Japan invoiced step2, but I have doubts
  4. is it step 1 or 2? the crankshaft weighs 24.5kg some problem with loading pictures, added them in the following message
  5. 270$ usd. send anywhere, I can take a photo on request there is also a RB AWD Girdle Plate, not suitable for spool caps (not suitable for 2nd holes), 180$ usd. 4wd I'll give it together for 340$ usd!!!! I can send on your terms
  6. Sale used Spool RB Billet Main Caps Set Additional photos on request Located in Russia. Moscow, send anywhere weight 7.7kg Price 500 usd
  7. can the exhaust system not be wide enough? It's 3 inches.
  8. BP Ultimate 98 octane is this the maximum boost on this fuel?
  9. it's a resonator, but I cut it out but for some reason I can not boost more that 26 psi at 98bp
  10. boost up to 1.8 bar
  11. I figured out what was the problem, the resonator created a back pressure in the exhaust system of 0.6 bar I installed single mamba GT3582R (11 blades, t3 0.82 ts) on same confing 1.1 bar = 478whp I'm going to cut out the resonator, then I'll make a graph for 2 bars dyno
  12. I think to put 3582 0.82 T3 Twin Scroll and still look at the turbines mambatek. but the difference in price is not big, I think it's worth it?
  13. EFR is expensive, how about Precision 6262?
  14. what wheels should I try?))) these will definitely work Inducer Dia. : 46.52 mm Exducer Dia. : 60.13 mm Extend Tapered Tip Exducer Dia. : No Extend Tip Overall Height : 24.50 mm Trailing Angle : 45 Degree Blade : 6+6 Inducer Dia. : 47.10 mm Exducer Dia. : 60.13 mm Extend Tapered Tip Exducer Dia. : 64.98 mm Overall Height : 29.50 mm Trailing Angle : 45 Degree Blade : 6+6 Inducer Dia.: 49.62 mm Exducer Dia. : 61.98 mm Extend Tapered Tip Exducerdia : 65.90 mm Overall Height : 27.63 mm Trailing Angle : 60 Degree Blade : 6+6
  15. What is the difference in the number of blades in the turbine wheel? 9,10,11?
  16. Anyone know the spec of GT III-RS / GT III-SS?
  17. on another forum wrote (hks 2535)
  18. hks 2535 not a bad option, although the wheels are bigger -Wheel- 56 Trim - 51.6 Inducer / 69.0 Major I think since I already bought those wheels it's worth to try them, if I do not go to put the original)) I did not find that someone used such wheels earlier
  19. I do not understand what the problem is, because there were turbines HKS 2535, 2540, GT-RS. They have much more wheels than what I want to put I understand that the smaller the angle the better the air is compressed and the more pressure can provide the wheels
  20. and how about this wheel? Nose Dia. : 12.53 mm Inducer Dia. : 47.71 mm Exducer Dia. : 60.13 mm Extend Tapered Tip Exducer Dia. : 64.10 mm Tip Height : 4.44 mm Super Back Height : 2.30 mm Overall Height : 24.60 mm Bore Size : 5.99 mm Racing or Non-racing : Racing STD or customs size : STD size Trailing Angle : 60 Degree Blade : 6+6 Bore Type : Through Fits OE Comp Hsg : Fit OE Comp Hsg Cutback : 0.0 Rotation : Forward
  21. what's the difference between 45 and 60 Trailing Angle? Will such wheels fit?)) Nose Dia. : 15.41 mm Inducer Dia. : 46.52 mm Exducer Dia. : 60.13 mm Extend Tapered Tip Exducer Dia. : No Extend Tip Tip Height : 6.16 mm Super Back Height : 2.30 mm Overall Height : 24.50 mm Bore Size : 5.99 mm STD or customs size : STD size Trailing Angle : 45 Degree Blade : 6+6 Bore Type : Through Fits OE Comp Hsg : Fit OE Comp Hsg Cutback : 0.0 Rotation : Forward
  22. what role does Trailing Angle play? 45/60 CZP Pro-Boosted Garrett GT2860R BB 700+ HP Billet Wheel used this wheels Nose OD: 11.82 mm Inducer Dia.: 49.62 mm Exducer Dia. : 61.98 mm Extend Tapered Tip Exducerdia : 65.90 mm Tip Height : 4.95 mm Super Back Height : 2.32 mm Overall Height : 27.63 mm Bore: 5.99 mm Bore Type : Through Blade : 6+6 Rotation: Forward
  23. I can always put the wheels from 5s and it will definitely work. They are simply cast wheels, but they want billet.
×
×
  • Create New...