Jump to content
SAU Community

Ronin 09

Members
  • Posts

    6,420
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Ronin 09

  1. come on!!!!!!!!!!
  2. apparently the rear screen is very hard to do without farking the seal... ylwgtr2 told me seeing that he pulled out mine... *shrugs*
  3. It's 50/50 with alfas... 50% chance of spontaneously falling apart from rust... 50% chance of terminal failure of electrics
  4. My suggestion "A REALLY BIG STICKER"
  5. Taken from the service manual:
  6. door trim off, feck around with (by memory) 4 adjusters down the bottom of the door.... will have a look at the service manual
  7. yep that's the one. I had the std R32 tear in the top corner of my door seal and it was annoying me so replaced them starts at the base of where the b-pillar trim meets the body, runs up the b-pillar, arcoss the roof, down the a-pillar and meets basically just below where the wing mirror would seal up against. do it. you know you want to...
  8. From the Japan parts thread. I replaced that exact seal when I got my car. These are the part numbers on my invoice. PS baron your pictures are $hithouse
  9. Hey Pete it's a GTT... will 265s fit on the front? GTRs are OK but would have thought they'd be too wide for GTT front guards...
  10. Hi MrVspec, if you don't auto clave the parts, am I correct in assuming that you don't do stressed stuff such as prop shafts? Cheers PS your parts look very well made... you NEED to get your website up again! PPS can you do an R32gtr with Z-tune style louvres down the middle?
  11. I had a quote for the DMS 50mm shocks for $3240 ex fitting and alignment. I think 4340 is a bit steep
  12. ?? WTF do you want to to draw more attention to Skylines? just remember that skylines aren't the be all and end all of cars... there is a thing called 'choice' and everyone has their own opinion of nice cars. don't be narrow minded. PS Supras kick r32/33/34 gtsts every time.
  13. oh yep that's right... drove past it the other day
  14. I ran 18x8 with 235s on the front of my 33GTSt, with +35 offset, 18x9 265s rear +35 (I think). I reckon you'll struggle to fit the 18x9 +26 on the front unless running a narrow tyre like a 225, as they will stick out of the guards. Similarly the 18x10 +13 is closer to GTR offset, so will definitely stick out the guards, by an inch or so... looks like lipped and flared
  15. - GREX 6 pots are a copy of the AP CP5555... but cheaper. Don't know if they work as well as the APs - Brembo F40 are a 4 pot front, not a 6 pot. - CSC look good value for what they are - engineer is ex-Harrop. One of the boys on here is running front and rear CSC kit, can't remember who. - pretty sure R34GTR fronts can be had for ~1500... Snowman was selling his - don't know if he's sold them yet... Do a search through the braking section, you'll find the thread.
  16. isn't that a reception place in Thomo?
  17. Al, I'd stay away from moving the front 4 pots to the rears because of the massive % difference between the piston surface areas. Plus even if you get the right master cylinder, you will probaby have to run a bias valve to limit rear pressure and keep the back from locking up. If you want a rear upgrade, I would suggest getting the R33GTR rear brembo and using the 300mm factory rotor, or getting the brackets to do the 322 rotor OR find a small porsche rear caliper that has two small pistons with the similar overall piston area to the factory 2 potters
  18. 343s are about as big as I've seen adapters. will have a flick through my HyperREV mags soon and let you know... as an aside I'm doing exactly that with the factory rear brembos - going from 300mm to 322mm rotors with a bracket
  19. Tomei wouldn't know when a car has been sold overseas; and it's not like they'll burn the records as soon as it goes. Just email them and quote the VIN - they'll be able to find the records that they have (if any)
  20. can you post a pic that actually shows something useful - the plate thickness? also post a measurement of the thickness using some verniers cheers
  21. don't think so... by memory mine doesn't think djr81 has retrofitted it?
  22. Ronin 09

    Pics

    nice... looks like it's about to pounce!
  23. cheers that'd be much appreciated
  24. EXPREME!!!! they look hot
×
×
  • Create New...