Ronin 09

No Jason, not having a go at you. There's just a lot of guys who don't think things through on this site sometimes. I was talking about a flat bed though... for the record I've got a suspension issue and had it towed on a flat bed today rather than drive and risk it...

Aragosta is not made by Ohlins.

A tow up the road is not rediculous. You drive into me and I'll kick your arse. Worse, a kid runs out and you run over him. Use your damn brain.

don't drive it - if the reservoir is empty you've got air in the system. driving it will be dangerous!!! get it towed to the brake shop and they will refil and bleed it

...

yeah it looks like they may have slipped a bit and look closer to zero camber. don't really want to run excessive camber as I don't want to wear the inside edges too quickly if I'm not on the track

the cut off pics will be heaps better when I get 20m away from the wall... then you see that it is very sharp

well they look pretty ordinary in the wet... but will take some pics against the garage wall when i get time: The cut-off looks pretty good though

SOLD SOLD SOLD!

ok thanks, looks like 1.5 deg or more neg it is!! at least it's not my car being a retard or something will have to get that bit straightened out and primed/painted

Yep i checked the fitting guide and there is only one way they can fit with the adjusters on the top. Ride height is 355ish and the castor rods are standard. They are offset like the standard arms, you can see that the top pic is the RHS and the second pic is the LHS. In the LHS pic you can see the offset bit in the top right of the pic Yep it was done on an alignment machine. It may have slipped though if they weren't done up tight enough - It's getting towed to the workshop tomorrow so hopefully can sort it out. Many thanks everyone for the replies, keep them coming!

yep, it's just on 1 deg neg (tops turned into the inner guards...)

hey is the McLeod testing station at LaTrobe uni??? that's not so far away as i was led to believe...

nah the arms are around the right way. maybe they're wound out too far... anway it's off to the tuner on tuesday so hopefully they can sort it out!!

go with Honda Euro projectors - I can get you a set if you want... think there's a set in the garage... I will take a pic of the results of my retro into R32 soon (there's a thread kicking around somewhere in DIY)

so they will still not get to 700hp...

what do twin GT-RS make?

it looks like the fitting guide is the way this has been done...

interesting... can you do me a favour and see if the fat part (i.e. the female side) is on the outside like we have on mine, or the skinny part (ie. the male side) is on the the outside of yours? cheers Showza!

I'm not exactly sure - I think some of the traders on here sell the 2860s. I may be WAY off with that guesstimate!!

found. thanks.

um they are all right hand drive too...