darrinspencer

Southside Yatala workshop

Guy's and gals it is time Queensland had another get togather. I am thinking this time we have a mini meet, cruise and finish off with a few dyno runs and bbq and a few light beers. I am working on a date in July to give people time to plan ahead (plus I am too busy in May/June) TBA I have spoken with a tuning shop, re the dyno, just need to work out the final date, time etc. Note is is only a 2wd dyno, so awd stagea will need to drop front shafts etc. At this stage, tring to keep it only stagea's but will need to have 15 cars on the dyno to cover costs The dyno will cost $40 per car for 3 runs with print out. So that is a minimum of $600 needed If we only get 10 cars on the dyno, we will need to share the costs, $60 per car. If we are really short on numbers, I may have to open this upto a few skylines to make up the 15 cars min. Stock cars are as interesting as modified ones. So if you are concerned your car is upto it, think again. Prizes.....did someone says prizes? To encourage people to attend and have a go I will be personally donating a brand new FMIC kit to suit C34's, R33 and R34. Value $300!! The winner will be decided by myself and the workshop. The workshop does not know yet, but I might hit them up to see if they can contribute to the fitting costs for the winner So all you stock cars out, HAVE A GO!!!!!!! Workshop name and venue will be advised once the dteails are sorted

10mm worst case. You may need to fit longer wheels studs, so more cost You maybe ok without one or maybe just a 5mm Also depends on what brand of shock as the diameter can vary. I have Bilstiens in mine

I run 19x9.5 +12 all round The rears are flush at 320mm ride height and 245/35/19 tyres are a bit stretched. The rims are wider than the tyre, so the cloest thing to the shocks. No rear guard rolling needed on my car. Clears by 3-4mm The +22 wheels you are looking at will run very close to rear shocks being 10mm further in than my car You may need to check this before you fit the tyres The fronts should sit pretty flush. As I have the R34 front, the guards a approx 25-30mm wider than stagea ones.

Found the leak. Confirmed mine is still leaking around the big grommet thru the fire wall More silicone and re fit the inner splash guard tomorrow.

Complete Front Mount Intercooler Kit to suit R33 Gtst, R34 GTT and C34 Stagea 600x300x76mm Tube and Fin core Polished alloy piping and fitting kit Pick up Brisbane or can post for $30-45 $300 FIRM

Sure it is not coming from the front? It does not take much to fill up and run to the back thru the floor bracing under the seats

I am having the same problem Drivers side front. It is not the heater core, I have that disconnected already due to previous leak I have tried the sealer on the big grommet, Still leaks heaps when it rains. I have no splash guards fitted due to R34 front. Going to try and find it on the weekend. Might park it in full darkness and put a bright light under the car, in wheel arches and in front of the windscreen and see if any light comes thru into the cabin. That shound find the leak. I know it is not around the windows either. Thinking it may be a possible rust hole in the wiper arm area in front of windscreen

No updates. pretty much untouched for the last 6 months. Just enjoying driving it after 2-3 years off the road. I did fit the red recaro's, but since sold them to Aaron at importmonster for his car. I need to finish the roof rails and do RH CV boots. It has the jap radio, so only get some AM stations. How sad. No new engine as planned, happy with rb25 at the moment. Have been spending money on other things like new parts from China, FMIC kits and 4WD snorkels etc. Bought a another caravan yesterday. I have different priorties at the moment. Must be time for a QLD crusie again thuo.

The mirrors are genuine Ganador. They around $500-$550 un-painted new from Japan. you can them get s/hand. These were for a c34, but I think there is 2 model's of C34. One is the Stagea and the other is Laural c34. I think these were for the Laural as I had to mod them with a grinder (solid alloy) at the top pointy end to fit the window rubber.

No they won't fit. From memory the bolt patterns are approx The Evo's were approx 405 wide and 300 long Drift were 330 wide x 300 long Plus ALL SEATS ARE SOLD. EVO's WENT ON EBAY A FEW WEEKS BACK.

True Your price is fair with those disk included I paid $800 for a fullset with worn out disks, was 2 years ago thuo.

We ended getting 4 sets made. Only took 13 months, we were promised 6-8 weeks. $600 a set and they dont fit. I have 2 pairs standingg up in the corner of the garage. I think they need a good days work to get them flat and sitting right before painting. I have not had time to do it, maybe soon Not that easy welding up the factory ones. they are very thin s/steel with a plastic/rubber coating. that would have to be removed to weld them which would stuff them up as the last 50mm each end is plastic not metal.

What exactly are you looking for? The ECU harness only or do want all four, ecu, coil, starter, knock sensors. I have the ECU only, I have one s/hand and I also have a brand new one. Might have a starter one, and I do have a coil, but the main plug is missing, not sure why. No knoc sensor harness.

Sold the other day for $300 Nismo rods finish tonight on ebay

I have a 260rs airbox and snorkel (same as r33 gtr) $300 delivered Located in Brisbane

ARP head bolts sold thanks

The stagea you bought is a AWd RS4 right?? You will have big issues if you run those tyres. Need to be the same rolling diameter front to rear.

Pic's of nismo rods and ARP head bolts Nismo rods will be on ebay tonight, start bid $850

Not yet. I was trying to get the manufacture to buy a M35 kit to copy, until they realised what they cost They want me to send over a sample (pipe only) which would cost me $1000 to do, which depeneding on the number of m35 sales, I would need to recover some of the $1000 outlay. I will probaly still do it, but i will would be min 3-4 months before they would be done.

yeah, will have to cut under battery. These are the cross over type, not return type. Have 10 full sets coming. Plan to order some return style, when I find a manufacture, May have to send them a sample to copy. Have some 3 sets of Bride copies coming as well Might have to "test" a pair in my car

Not too bad thoses seats for the money. I just sold a brand new pair for $360 about 3 weeks ago. Do you need a FMIC? I will have brand new ones for R33/r34 C34. tube and fin for $300 full kit in approx 6 weeks.

Sorry I have been very slack with thread and pic's Promise to upload pic on weekend and shrper pricing, need to move this stuff. Items sold Spitefire coils N1 oil pump CAS

I had the same problem. car use to stop

I have a Rb26 one with washers, Should be the same? Southside Brisbane or pickup in CBD $20