darrinspencer

When you say GTR, I assume you mean R33. R33 GTR rear strut braces do not bolt to the top of of the towers like the C34 ones. They bolt accross the back of the tower on studs

Another red one to go thru the auctions Flood damaged this time. Low Km's http://www.pickles.com.au/damaged/vehicle/CP-06-09-Nissan-GT-R-R35-DCT-AWD-Coupe-2-Doors/itemid-1-252234059/lotid-0

Have a search for my thread. I found there to be 2 different lengths I have quoted the measurements to check I ended having to lengthen a R33/R34 one approx 25mm I used a JJR version.

Pic's of car?

Walk away. Neo engine. What difference does that make Most shops quote approx 6 hrs ($80-100/hr) to remove and replace a clutch for a GTR. No different for a stagea So add any additional time to replace bearings in box etc. While the box is out, probably best replace the clutch and rear main seal on motor and gear box input shaft seal. Mine makes a noise as well.

No $1100 no less, otherwise they go in my car

Evo Recaro's on ebay. Finish tonight http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170606911734&ssPageName=STRK:MESELX:IT

Wrong I have one on mine Can be done

Please don't take offence to this if you are a genuine seller Since you only joined yesterday, could you post pic's of damaged car for some proof Unfortunitly, we get a few scammers thru here

Forget it, it can't be done

Mine is fixed by big course self tapers.

Raysboostn has a set of rear 350z brembo's for $300 pair. No bidding needed.

It will be OK, they are only brakes Imangine if he filed the BOV and it stopped going "Pshhhhh" That would be worst

I have brand new one and a s/hand one ECU harness only New $500 no longer available from Nissan S/hand $180

I agree with you Ray Had some preliminary pricing for kits Should be able to sell them for under $400 full kit. Just need to get the supplier to the buy their own sample

There was brad's with a Jun 2.7 kit 605rwhp ran 11.6 and RBNT's had over 500rwhp he ran 11.7 from memory. Be relistic with your budget and what you can afford. To put out those figures for a daily realiably will cost $20-30K. Stick to max of 300rwkw's and save gearbox issues etc.

They make over 50 differnt sizes and types. Bar and plate, tube and fine, delta fin etc. Should be able to find the right one Haven't most/all intercooler suppliers been claiming a pressure drop of 0.2psi for years accross a std 600x300x76mm core? Very few people reach the max capabilty of this size core

I need some feedback on aftermarket FMIC kits for M35. To be honest I do not know much about M35's. I have searched a bit and found some info. 2 kits available, the Biltz kit $999 or the HPI kit $770. Plan was to get a kit made, which kit is the better one or are they basically the same? Mainly piping design and fitment is the main thing. Coolers are pretty much the same as any other one around. I currently have an order for 10 kits to suit R33/R34/C34's coming in 6-7 weeks and some great pricing I am waiting back on pricing for the M35 kit to be made, but hopefully they should sell for close to half of the above kit prices. Am I wasting my time or is there enough demand for a cheaper alternative??

Tyr this guy for pricing, you might be supprised http://www.streettotrack.com/

I have 250rwkw and want more. You soon get use to it. 250rwkw puts it in the similar performance as most quick factory built cars like HSV's and Turbo Falcons etc. So quick, not fast. I have a gt3076r .82 rear IW on 15psi manual, and ran 13.5sec down the quarter for example Are you happy with that or do you want to more?

just having a "the grass is greener on the otherside of the fence" moment

What he said Might add a couple of pic's I ended stripping the first rb26 I bought after changing my mind. I then bought another one a few months later. sold it last week as is. I decided that if I was to sell off my current rb25 setup and build the new engine and swap it over, it was still going to cost another $10-15K to gain 100kw. I just cannot be bothered sinking and more money into this car. On a side note, that Lancer I bought 18 months ago a few pages back, I finally got it painted on Saturday. It is half back togather. Might drive it instead of the Stagea...not. Anyone want to buy a chic's car??

Don't forget our import duty of 5% plus 10% gst on top plus smaller population equals less turn over so higher profit margin is needed to stay in bussiness.

No sorry, chasing cash

I will have a pic at work somewhere Not mine on ebay, that does not have the snorkle either