darrinspencer

If you change your mind I have one out a 260RS (rare) $300 with snorkle

Last chance on Evo Recaro's. . .

All PM replied to Everything still for sale I am not interested in Pm's with offers of 50-60% of the asking price!!

I am thinking about selling mine Series 2 with r34 front, converted manual, 250rwkw (15psi) capable of 300 on 19-20psi and tune Custom paint , wheels. susp, brakes the list goes on.

Sorry for the pic delays. Trying to get a car painted today. Checked out the full gasket kit, it has ALL gaskets including the turbo gaskets, valve stem seals, o rings, copper washers, sealant, head gasket etc etc

I will check this afteernoon when I get home Pretty sure everything except turbo gaskets Will get a pic

Ni oil pump on hold awaiting payment Offers on the rest considered

Looks a bit funny to me Anyone who puts a gtr front on a stagea is a bit strange anyway.....

I have the following parts I was collecting for a Rb26 engine rebuild and sawp into my car. Brand new Parts Full genuine Rb26 engine rebuild gaskit kit $300 ACL multi layer Head Gasket $170 N1 Oil Pump brand new suit all RB's $290 ARP Rb26 head bolts new $330 Genuine Brand New R32 GTR RB26 ECU Engine Harness, no longer available from Nissan, (there is one on ebay AU for $750) sell $500 Nismo Rb26 Conrods, suit Rb25 as well $975 Used parts R32 Rb26 ECU engine harness $190 R32 Rb26 ECU $90 RB26 R32 Spitfire Coil Packs, 4-5 months use $325 Stock Rb26 R32 factory Turbo's and dumps $225 pair Rb26 R32 CAS $60 Rb26 R32 Early Crank, looks GC $200 Rb26 Block and cradle, number 2 cylinder pitted from water. Needs max rebore or sleeve $50 Pick up only Rb26 used oil pump $60 Rb26 factory oil cooler block $80 Rb26 stock Rods and pistons, look OK set 6 $100 Shipping extra on all parts except block Pick up Brisbane. Pic's to be added

http://www.japaneseimportspares.com.au/nissanskyliner34/4 1/4 cut $250

I have one in Brisbane $10 pickup Not worth posting sorry

Sold pending payment.

Drift seats sold and picked up EVO Recaro's still for sale for 1 more week, than off to ebay (I will not take $1K for these)

I have a fairly complete Rb26 that needs a rebuild. I have bought this "as is" from Japan thru Importmonster. I have decided not to go ahead with an engine rebuild and swap so it is for sale. The engine arrived last week and is still in the warehouse at IM in Melbourne ready for pickup or delivery. I am in Brisbane, so instead of paying for shipping to Brisbane, I have 1 week only to be able to sell it from Melbourne or arrange delivery from there. Otherwise I will have to ship to Brisbane and sell it from there at a higher cost. Looking at picks it has no turbo's, alternator, P/steer or A/c pumps. No wiring harness or fan. The enigine was listed as a H6 which is out of a 1994 model, so it has the added bonus of the upgraded crank same as R33 with larger oil drive. Only pic's I have at the moment are from yahoo auctions, they are attached. I assume you can inpsect if needed in Melbourne. Price pick up in Melbourne is $1300 firm as is. People ask $800-1200 just for a the head. Delivery to Sydney, Brisbane or Adelaide will be approx $150-220. Can get exact quote if serious. I have some new rebuild parts available but will list a new advert when I have pic's and prices etc Brand new ecu harness, full genuine gasket kit, ACL head agsket, Nismo forged conrods, N1 Oil pump, s/hand spitfire coils, s/hand stock turbo's, early crank, rods and block

$30 delivered

Red recaro sold Evo's and Drift seats still for sale

edit

They do not come with rails They will fit any car with the mounting right rails Bride ones will work, about $300 pair s/hand Red Recaro's on hold (sold to mr importmonster)

Recaro's $1300 pair Drift $398 pair

Open to offers on the recaro's

http://www.skylinesaustralia.com/forums/topic/351069-pairs-red-recaro-millennium-pair-evo-8-recaros-and-i-pair-drift-blade-seats/

I have collected a few pairs of seats (I have a seat fetish) Bright Red Recaro Millennium SR3 2003. These are near new and came out of a stereo demo car, so VERY minimal use They are in perfect condition, no rips, cig burns, stains or split foam or wear marks. Would be close to $4k new. no rails I have just fitted one in my stagea to try it out. Seats have been cleaned $1400 the pair Mits EVO 8 GSR Factory Recaro, SR4 or SR5 2003. They came out of a 30,000km old import so in near perfect condition. They have black and grey swede sides, so they are the few funny marks in pic's. Just need to brush them the other way. No rips, cig burns, stains or split foam. Drivers seat has very minimal wear mark from getting it and out. Probably cannot see in pic's, hard to notice. 95% condition. Passenger seat 99% perfect. They seats have hard plastic backs. No rails. You can but these a bit cheaper elsewhere, but not in the condition. Would be close to $4k new. Seats have been cleaned $1400 the pair. Drift Blade seats Black, similar to R34 GTR seat. Brand new in the boxes. Only picked them up a few days ago. The where on sale for a crazy $398 pair before xmas so I bought a pair. Impulse buy . Normally are approx $660 pair from Autobarn. Made by SAAS. No Rails Just want my money back so $398 pair FIRM. May except a Payal payments if price is close to to advertised prices due to fee's. That way you can buy them on C/card Frieght. If you can arrange cheaper, that is fine. Prices door to door. Size 130x60x40cm 15kg Each times 2 Brisbane free pickup Sydney $90 pair Melbourne $120 pair Adelaide $175 pair Perth $295 pair

R34 gtr front brembos are 14mm bolts so should bolt on. May have caliper clearance issues, depends on wheel design

Fitted a brand new bright red Recaro millinium to the drivers side. passenger side can wait to see if I like the fit. Picked up a pair of new Drift seats (r34 GTR copies) today as well in black Cleaned up the the EVO 8 recaros as well today Need to decide which seats to use. Also looking at some new Bride Euro II as well later this week. similar to GTR Measured up some new 6 pot 355mm brakes today for the front to see if they will fit behind the 19" GT-c's

I will throw my 2 cents in, may help, may not I have spoken with Ron (owner) of TBS, tweed brake service in Brisbane. Mainly do reconditioning of every brake and clutch parts for last 20-30 years. Knows his stuff. He told me calipers need two seals, one for the fluid and the other is dust, which is a ADR rule. Might be worth chatting to him, forget emailing him, and see what he could offer. It might be cheaper get 2 peice rotors and dogbones, braided lines (adr approved) from him to save on freight cost from USA. He can supply 2 piece 355x32mm disc for approx $330-360 each, depends if you want std, dimpled or slotted etc. Can machine then down smaller if need dog bones are approx $110. Also add a link to the caliper you are suggesting, as you can down load a templete of the caliper so people can see if they fit their wheels before buying. Any idea on the cost of the calipers on thier own? Also TBS does a 8 and 6 pot South african made and design caliper sim to AP's front kit is $2600 drive in drive out custom made fit to suit your car and wheels etc. Can even do rears by fitting the factory drum (handbrake) centre to bigger rotors, by making them into a 2 piece combo to retain the handbrake.