darrinspencer

I have a pair of m spec front bar lights $50 pair in brisbane

I will have a spare one of these in about a weeks time

It is on next wednesday 30th

super cheap series 2 red stagea, stolen and recovered up for auction next week in Adelaide http://www.manheimfowles.com.au

I can not get a link to work www.manheimfowles.com.au Do a search for skylines, in Melbourne Might be of some interest to someone, you have 4 days before it sells

Looking at heading out to Willowbank test and tune night on Wednesday, 6th of Febuary to give the Stagea a run Have a few mates heading out in skylines and motorbikes to run aswell If all goes well on the dyno next week, I will be running my car Let me know if you are interested, either to watch, have a run or a laugh, so we can meet up. For the guys that live out at Ipswich way, I expect you to be there CANCELLED DUE TO RAIN NEW DATE WILL BE IN APRIL

R34 what? GTR Front? Yes my car is a series 2

Pm Andrew, he is in sydney and has a full series 2 for wrecking http://www.skylinesaustralia.com/forums/2-...Sa-t202162.html

No more than a standard series 2 cluster I sold one for $150, 18 months ago The autech may have a higher reading on the tacho, which would be pretty useless on a stockish rb25

Prices revised

It must be school holidays

ALL jap cars run to 180km/hr

http://www.skylinesaustralia.com/forums/S2...&hl=cluster

It will if the autech cluster is a series 2 as well Series 1 and series 2 clusters have a different plug setup n the rear Have a search, I have posted the pic's before

Beware once you remove the wheel and go to replace with new wheel, the "clock spring" as it is referred to is in the right place. It is the bit with the yellow sticker on it. There are 2 arrows to line up and a locating pin that plugs into the back of the steering wheel. The yellow sticker tells you how to line it up. Sometime you need a puller, other time it comes off without too much effort. If you do not have a puller, loosen the nut so that it is off enough to protect the end of the steering shaft, load up the wheel with your knee's, and hit the nut with a hammer and a peice of wood to protect the shaft. It should pop off. If not, use a puller.

$70 delivered

Pretty hard to fault this

No it won't The stagea 4wd front struts are interchangble with the R33 GTR front only.

Brycey The rubber is attached to a peice of metal aswell, they come as one To do it correctly, there is also another brace under the top of the front bar to keep everthing in shape, plus you will need approx 4-5 pastic clips as well Not sure if the brace on the underside of the top of the bar will work on your car because you do not have the genuine reo etc. I have the numbers at home somewhere, will have a look tonight.

I think sydneykid has mentioned it before, the Walbro needs 13 + volts to perform at 255l/hr You may only be getting 11 volts and therefore your pump is not pumping enough fuel for your thirsty rb26 Try this mod http://www.skylinesaustralia.com/forums/Fu...l&hl=direct

Masa Motorsport make the guards in Japan

I have a pair of Bride C34 rails that will bolt into all r32 and r33, but make the seat will sit approx 20-30 mm higher. If you are on the short side in height these will work well, but if are 6 foot plus then they won't $290 pair in Brisbane plus post approx $30.

I have nearly all the parts removed from a series 2 auto that has been converted to a manual Centre console complete, tiptronic auto shifter, brake pedal, foot brake and cable, flex plate etc $offers Plus also have a brake booster and master $50, bonnet hinges $25, 2xbonnet catches (same as R34 GT) $30 each, HKS pod filter with adaptor $50

I have spare drivers door window switch complete to suit a series 1 Will not suit series 2 as the plugs are different $40 delivered

I have a spare pair of bride seat rails to suit nearly any aftermarket seats like bride, recaro, justjap etc. Replacement new is approx $500, in near new condition. Sell for $240 pair I also have another unkown jap brand RH seat rail, very similar to the bride. $130 These are made for C34's, but will bolt directly into R32 GTR and GTS, R33 GTR and GTS and R34 GTR only, not R34 GT without slight mods to 1 or 2 mounting brackets In skylines they will make you seat approx 20-30mm higher than skyline specific models. So if you are a short arse they will work well.