darrinspencer

You can order Masa parts directly from them, but they put you thru another company Sung Seng CO for payment and postage. I bought my front guards thru them A front bar will cost approx $500 for sea shipping and jap inland freight to OZ on top of the purchase price of the front bar? But when it arrives it comes thru a freight company and you will need to pay for a customs clearance of approx $150 which sucks, even thuo it is under the $1000 duty limits To be honest, you are better using someone like Slidwise or Homerules on NS that bring over containers, but then you have to pay freight from their port either Sydney or Melbourne unless you can pick it up.

I have one out a series 2 Stagea with Neo motor Most likey the same as a r34 Pm me a offer In Brisbane

Just for your info, the series 2 does not have the sensor in the same spot as the series 1. I did not have to relocate it for the manual conversion. There are a few cars getting wrecked on the forum, so it should not be too hard to find a cheap one.

If you can get me a full set for $250 in Australia, I will by a set off you It is irrelevant what you pay for them on Yahoo. It is great if you live in Japan. You can buy a stagea for $1-3k off yahoo, but it will cost you alot more once it is in oz. A $250 set off yahoo works out to be approx $470 landed going thru Slidewise. Condition unkown, take the risk. EMS freight 6kg's is approx $120-130 alone Good luck finding what you want, maybe try Supercheap, I remember seeing some there for under $200 a full set! I rang Nissan, you can get the RH outer for $344 (trade) brand new. So a full set would be over $1400! Makes my set for $500 look pretty goo I think.

Ian A R33 airbox will bolt straight in your Stagea, but the snorkel is different I think

Any chance it is the one on Jspec with twin HKS GTSS turbos and rebuilt engine? You maybe pushed to get it complied Try Phil at IAMSHE on the gold coast

If you want to come and have a look at my wheel and the condition is good enough, I will sell it to you as previously argeed. If it is not good enough, you can borrow it to get your car thru compliance. I do not drive my car, it just collects dust. Most tein coilovers for the Stagea are the "Wagon" series which have 4 kg front and rear springs which not firm like typical coilovers. I have a set in my car. Tein do make a HA model aswell which are alot heavier. Will they pass your Impul seats for compliance. I have my standard series 2 seats lying around. You may find it hard to swap your Tein's as they will only suit RWD stagea's due the fronts being different. Most ie 90% of stagea's around here are AWD.

$500 for full set

Did you check your PM's

Need these gone Throw me a offer

With GTR's the hole is designed to be there from factory and has an extra thickness of metal to reinforce it. With the 260rs, they started out as standard stagea's and Autech has cut a hole, just like you would. So if a 206RS passes ADR and rego inspection, why should a standard stagea get defected. Would mean there is 2 sets of rules. Maybe something you could prove in court if you get defected. That was my point.

I had to do the one in my R33 aswell. Had to remove the complete dash A good 4-5 hours from start to finish

You know it is not cool having a fast car with ugly tail lights

Remove your door trim and the triangle plastic trim behind the mirror on the inside of the door

You can get Nissan optioned Momo wheels Find them on yahoo auctions Normally sell between 25000-35000yen You will need to get the specific one for a r33, as they all look the same, but the airbag plugs varies between nissan cars

You can just pull the mirror off. It mounts on a plastic backing board with 2 plastic pins that will pull out of the main body I did it with my R33 ones, and need to do the same with stagea ones now to get them painted Not sure about the motor

Wrong only late 97's R33 use the series 2 poncams, due to different CAS 95 1.5 is a series 2 engine, but still uses series 1 cams. So many people have been caught buying the wrong ones Tomie only make one type for R33's 256deg 8.5mm lift R34 Neo's have type A and type B

???

That kit is a Dolphin kit The series 2 dayz bar they are talking about is nice aswell and likes like this

If that white car is yours, that is not a Dayz kit The silver is car ugly

$250

I have a full set of series 2 tail lights in perfect condition Make your series 1 look more modern and do away with those ugly orange indicators Can help with fitting if in Brisbane $SOLD!

I fitted R34 GTT turbo brakes front and rear including the r34 booster and master Fronts- Calipers and disks bolted striaght on, no mods 310mm disk on r34 (r33 are 297mm) Used the stagea front brake lines and banjo bolt. Need to shorten banjo bolt approx 2-3mm, done in lathe, or you could mod the caliper by removing the metal seat so the banjo bott will not bottom out Rear- same size as R33, caliper and disk bolt straight up. Used the r34 brake line both the metal line and the rubber hose, bolted straight up to body. I also fitted the R34 booster and master as I bought everything as a package. Not sure if it made a difference, but they have a different part number, so maybe it suits better. ( note brembo fitted GTR's ie vspec 32's have a different booster to the non brembo cars) Red caliper is a r34, which shows the metal seat, black caliper is a series 1 stagea Note my car is series 2. Wheels clearance, I have R34 gtr wheels, so no problems

Still looking

Only R34 GTR fronts will bolt into all R33 and r32 R34 GTT fronts will not bolt straight in without mods to mounts. I have seen a r33 gtst with R34 GTR front and rear seats fitted, so the R34 GTT rear should be ok.