darrinspencer

That's useful

Looks like any other skyline install The kit I used was Justjap's type 2 kit with larger end tanks than the cheaper type 1 kit I bought it about 12 months ago for $499

Thanks Stan The Stagea bottle is not in the engine bay like a r34. It sits under the battery, just in front of the wheel, but the aftermarket botttle may still work if I can fit the factory bottle back in. I would prefer to keep the factory bottle with 2 waher motors, one for the front and one for the rear of the car Ps The mods have really started. . . . more updates later

I have just fitted a FMIC kit to my series 2. The kit is the standard cross over type that every one sells for R33 and R34. I had to remove the windscreen washer bottle to fit the return line thru the chassis on the right hand side of the engine bay. I assume others have had this problem and wanted to know where and how you re-mounted the bottle

Disconnect your battery first. Need to remove the airbag second. On the side of the steering wheel is 3 plastic covers. Remove them. You now can get to the plug for the airbag and 2 bolts, one on each side. You will need to undo the bolts with a special star drive (I think it is a T50) Once the bolts are removed tha airbag will come out. Then simply remove the steering wheel like any other by removing the nut on the steering column shaft and pull the wheel off.

Need a set of injectors for a RB25det Neo R34 Either 480cc Nismo or 530cc Blitz New or s/hand

The 34GTR and 34GTT head lights are the same, but the rubber that is fitted on the headlight is different to suit the difference in the GTR and GTT bonnets I have used GTT head lights on my R34 GTR front end conversion to my Stagea I have used all 34 GTR genuine parts like bonnet and front bar and reo and Masa conversion guards

Have they been machined before? If so what thickness are they. 28mm is the minimum

Cheap kits are just not worth it. What you save buying the cheap kit, you spend double tring to make it fit Their cheap for a reason

I would only recommend DMD out of that list for quality and service

The whole time the engine is running and rocking from side to side, the S/S line will rub thru the alloy a/c line I will give it 1 week maybe 2 before your A/C stops working. Best to space it away or put a rubber sleeve on it

I have a complete one with surround If you do not buy Ska's let me know

NO That's why you should explain or clairfy when posting esp when people are asking a question about a topic they do not know anything about. Otherwise someone is going go and buy a set of wheels too wide or the wrong offset and have to beat the shit out of the rear guards and run a way too narrow a tyre for the rim size.

Your using 235's on 10 inch rims as per per your first post? They would look mega stretched? A "normal" person would use a smaller width rim and run the correct width tyre for comfort, looks, handling and safety

R34 GTT is different to all the others So not the same

Try Motovation Imports on the south Gold Coast Normally have good clean stock and usually advertise on carsales and will have finance. I would not recommend too many Brisbane yards.

Good idea, but the coil pack cover is made of plastic, so powder coating will not work 2-pak paint works fine

2 or 4 door? I have a 4 door one

I have a R34 GTT turbo Still on car can test drive in Brisbane, much better than an unknown one sitting on the ground $400 pick up

The series 1 stagea is the same as a series 2 R33 GTST The series 2 stagea has a neo rb25det and has the same turbo as a r34 GTT, ie larger rear exh housing 260RS has the same turbo's as a R33 GTR, so ceramic

I am 99% sure the R34 GTT 2WD floor pan is different, but not sure how much different R32, R33, R34 GTR and Stagea are all the same Best thing is to try them in the car and bust the rumour!

A bit more info, but not Rb25 Here is a Niztune R32 rb20 chip they are selling on ebay http://cgi.ebay.com.au/R32-Skyline-ECU-Sta...1QQcmdZViewItem

Pm FLY PSI He is after a pair of side skirts

Power Play imports in Sydney or C-red in Perth $1700 pair delivered plus rails

R33 gtr boxes are a little more. I got mine for a good price of $800 You can get r32 gtr boxes from $500 and GTS4 boxes for even less, but they are not as strong. R33 and late 94 R32 boxes use a pull type clutch which cost twice as much as a push type clutch I bought a s/hand pull clutch for $100 and then paid over $800 to rebuild it from Jim Berry - Race clutch.