darrinspencer

I measured my R34 GTT front disks, 310mm R33 are 297mm

This guy has a few Stagea's they are wrecking Trevor Melbourne 0422010562

Just found another parts dealer Trevor Melbourne 0422010562 Has to 2 complete series 1's, one has leather and twin sunroof's Has 2 more complete cars coming for wrecking

Give me about 6 weeks and I will be there Otherwise I will have to put the Stagea on a trailer and tow it with my VX wagon

It hasn,t been wound back, it has an aftermarket Nismo 320KM speedo cluster fitted which cost approx $650 All jap cars have 180km speedo fitted, so it is not a un-common upgrade, esp in a GTR A car of this age and quality should have the Jap log books to verify At least you live in the NT so you will get a chance to go past 180km/hr

I can not offer any advise on 34GTR's, but I see this one every day driving to work Considering it is a 2001 model and very low Ks, and has some good extra's fitted, it is well priced at 70K You would be hard pressed to import a 2001 model much cheaper and have to hope it is in as good as condition. http://www.streetmachines.com.au

Correct

Try this mob I have used them with great pirice and results, plus you can get a online quote http://www.airroaddirect.com.au/airroad/home.sok

I have a set of series 2 Stagea or R34 4 door mags 16x7 $200

They can make ADR legal ones, but they cost more, ie thicker glass When I got a insurance quote from Shannons they were fine about the conversion

Car series 2 auto $13k excluding tyres and rego Mods as far $20K R34 GTR front, r34 GTR wheels,FMIC, new front & rear seats, susp, exh, manual conversion, r34 brakes, plus more To finish $5K Turbo, PFc, cams, Z32 Have only driven the car for one day since I have owned it in 8 months Will be all done for the Brisbane Autosalon

The guards will get copied in the next 2-3 weeks Price has come down to approx $500 pair My conversion is coming along very slowly Just have not had enough time......house reno Front is stripped, radiator support removed, guards mounted, having problems with bonnet hinge mounting. Need to make custom brackets/spacers. Once I get the bonnet mounted hopefully this week-end I can then work out the location of the R34 radiator support. unfortunitly is not a direct swap. Once I get this sorted, it will just need painting. Will start a new thread next week with pic's

I have a pair in very good condition in Brisbane $80 pair

I bought a set of Yahoo for $50 plus freight $400 is a bit steep

try using this http://marksink.com/tire_wheel_offset/offset.html

Some of the last series 1's had non turbo neo motors But the turbo neo only came in the series 2

Rianto Some more info I measured my R34 GTT front disc last night It was 310mm diameter R33 Gtst disc at 296mm would be too small, the pads would be hanging over the edge of the disk

Can you get ER34 GTT single turbo front slotted rotors These are 310mm, not the same as R33 GTST as the RDA listing suggests If you can confirm they can supply them, I will have a set Thanks

If you can't find the part numbers, let me know. I have the part numbers, because I have bought all those bits recently

I have a set of Volk GTC's In brisbane Click the link below

www.streetmachines.com.au Brisbane Street machines has just got in a series 2 Autech in white Low k's for $45K

I have a set of R34 or Stagea series 2 factory wheels 16x7 $250 Brisbane or Volk GTC 18x8 +30

I bought them at the end of June Has taken 8 weeks to get here on the slow boat If I get the matching rear seat, I will probably get rid of my series 2 auto seats

Finally got one my Garage Impul seats today. The other one will turn up in the next day or 2. The trim turned out to be the same as a manual Stagea or 260rs With a bit of luck I will be getting a matching rear seat tomorrow if I win the auction.

Paul Add me to the list As per the second post thanks