darrinspencer

I assume you mean in a Stagea? 4WD? Considering these boxes break in a lighter, RWD car with less torque, I dealt they will last long in a heavy 4WD Stagea, if that is your idea If you want 6 speed, maybe a R34 GTR box is a better option.

Ska is correct I believe If you have a look at you blowoff valve when it is off the car, on the underside there is a small hole approx 2-3mm diameter This allows a constant bleed of air back thru the inlet. The factory ECU is expecting it. When you blank it off, or fit an aftermarket blowoff valve, you get the stall problem Fitting a SAFC or new ECU can fix this problem, as you can turn the system not to allow for the constant bleed of air. You can test this theory, by refitting your factory blowoff valve, but put a bit of electrical tape across the little hole and see what happens. Let us know if still stalls

"Where are you" At work

I will be picking up 2 pairs of Dayz side skirts on the week-end I may be using a set on my car but have not decided yet one black pair and one white pair Perfect fitment and mounting, unlike figreglass skirts These are fairly rare and hard to get, ask Sydneykid. $350 pair plus freight

can you use these Nismo ones??? http://www.japanparts.com/db/partslist.php...e=3&small=2 Looks alot cheaper then 2k

I had the same problem on my r33 Turned out to be a loose turbo to exhaust manifold Had to change the gaskit as part of it had blown out from the turbo being loose. Fitted a new gaskit and new lock nuts, problem fixed.

Change or check 02 sensor I think Nissan say every 40,000k's??

Have you got the right boos kit? There is the cheap one which suits non airbag R33 93-94 approx $80 new Or the one that suits 95-97 airbag R33 approx $200-250 new I had a R33 1995 model with a momo race wheel, not hard to install with the right boss kit and wiring harness.

There are a few on the J-spec site for sale

Alex has agreed to buy the bonnet, both guards, headlights, high beam lights, front parkers Front bar and grille and reo to suit (part of the centre section has been cut to suit the opening in bar) is still up for grabs The front bar has got a crack on the bottom, will get some more picks, should notbe to hard to repair. If someone really wants my front bar and grille and reo, you could trade your old with Alex. You will need to make your mine up this week, as I will have/will be getting him a standard bar and grille this Saturday when I pick up some other gear from the Gold Coast.

All Stagea's have to have the zenon's removed at time of compliance The reason being they are not self leveling like the BMW's etc. Which means the BMW lights should not shine in the eye's of on coming cars, but they still do! The dial on the dash in the Stagea is designed for fine in cabin adjustment, for when the car has additional weight in the rear which causes the front end to rise, but unfortunitly this systems does not meet ADR's so the zenons have to be removed. IAMSHE who is compling my car along with many other people's cars, has told me they have to cut the zenon bulbs wiring out and they are not re-usable. So I am not sure how NIZMO do it. Best way is to borrow a standard set for complinace and keep your zenon's, esp when they are approx $3000 new! But you could get defected

Update I have sold the xenon's and are getting a standard set traded back this week. Then the car can go to compliance. Once complied the parts then can come off. So in approx 3-4 weeks. Need to talk to Alex about full front sale, before I start splitting up the front to different people

It is a factory option But you loose it when it gets complied, unless you swap your headlights for a standard set before compliance That is what I am doing at the moment with another Stagea owner

Have you got any pic yet? I am interested

R33 kit will fit series 1 or R34 kit for the neo series 2 model can get full kits from $350 from the Trader For Sale section

I will take the fuel pump PM me your account details for payment Thanks

Great effort! Would be good if you could add your detailed how to do post to the original manual thread So the R34 clutch pedal and mounting bracket fitted then? Also it was a relief to see the clutch master cylinder mounting hole locations were already there in the fire wall. Saved a bit of guess work Was it easy or hard to get a drill and hole saw to that location from inside the car?

Burns I paided $850 R33 g/box $450 to get s/hand clutch rebuilt $650 for s/hand interior centre console $460 for clutch pedal setup new Plus the other bits approx $2700 all up Labour I will do myself I will be doing the manual conversion and the GTR front conversion as soon as I get it it complianced in approx 4 weeks Then I will get it registered

Make sure you are getting power to the mirror first There is 2 motor's in each mirror 1 is for the folding function the other is to tilt the mirror If the tilt is working, then the motor for the folding function is the problem My r33 mirror's died within 2 weeks of each other, it was only a 1995 model, half the age of a "23 year old" car http://www.skylinesaustralia.com/forums/in...c=92499&hl=fold http://www.skylinesaustralia.com/forums/in...7338&hl=mirrors http://www.skylinesaustralia.com/forums/in...0398&hl=mirrors http://www.skylinesaustralia.com/forums/in...9186&hl=mirrors http://www.skylinesaustralia.com/forums/in...7349&hl=mirrors

http://www.nissansilvia.com/forums/Genuine...33-t169960.html

This is a common problem with all skylines aswell I did a search 2 weeks ago on the same thing as my r33 mirrors had stop folding in The general reason is the motor are stuffed and needs to be replaced Have a look thru the skyline maintenance section for some solutions Check first you are getting power at the mirror. Otherwise find some secondhand mirrors that work.

So how much is the group buy price?

Series 1 Stagea only ever came out as a auto from the factory except Autech 260RS Rb26dett Series 2 Stagea came as a factory manual or tiptronic auto Yes I want one My car is a series 2 auto that I am converting to manual Hope that clears things up

Looks right to me

Zoom Auto imports has one Might be a Nismo one 07 3348 6939