1400r

simple if your mate broke it you should fix it or he should what the world coming to? if he didnt then u have nothing to prove my 2 cents

yep but it would be fun while it lasted just kidding I will bleed it up to .7 bar while I have the stock turbo

cool thanks now Ive got to install my bleed valve mmmmm 2.5 bar he he he he

my 4 door seems to running very low boost the standard read out never gets close to +7 which is either 7 psi or .7 bar(12psi?) I plumbed in a blitz guage and its reading .4 bar max is this right for a stock auto 32 it seems to pull fairly hard for such low boost I ran a r33 man and only lost by half a length or so then ran my mate in his man ceffy and beat him due to wheel spin he says. So should it be running more boost?

noz you need to jackup the car then if you take out the speedo cable at the rear of the gearbox on a SR it will drain the fuild then undo the nut on the side of the gearbox and run a hose into the hole get out from under the car a pour a bottle of g/d fuild in presto instant g/b oil change no need for pit

yep picked it up the other day it needs a bit of work but the sileighty would still blow its doors off.

Sh$% man stop making me hyperventilate sorry to hear you've had drama's with it I never had half the problems you've had apart from blowing up gearboxes hopefully this is the end of the problems.

it doesnt shift like that all the time just if I have my foot flat I thought it would change at around 6,500 as a old Hpi mag I read reported funny thing is it will hit 8,000 rpm free reving in N? spoke to a couple of places they think it may be chiped. had a run with my mates man ceffy and chopped him due to his wheel spin then ran a white man 33 he beat me by around a car lenght or half a car length which I was fairly impressed by. It no where near as quick as Adz's laggy beast though I check that turbo before handing it over mate to make sure its just a stock rb25 turbo.

got it rego'd today and Insured third party as Im low on funds then drove in to work complaince cost me $1565 extra $300 for front upper control arm bushes and $65 for a new batt without letting me know till I turned up to pick it up on Sat. Its auto at the moment but it revs to 7,500 before changing with out the power or hold button on very strange?

paid for mine on the 12th Nov

Just heard back for the compliance shop 32 is going through regency tommorow they are sending all the doc's to me get it rego'd then I should be able to pick it up Saturday Yippee

ok opps sorry so it will and wont bolt up?

Im going through Best Enterprises they seemed good and cheap Ive heard other places have changed there prices to $1500 when I rang however I yet to be told when my car will be finished after contacting them twice and the car sitting there since Monday Im going to drop down there on Sat and see what they have to say. I'd say get it done it's only $1200 and then you can drive it on the road if you want. I don't know how you'd go trying to get it done later down the track. btw Ive got the cash for the guards waiting so let me know

by the way Adz www.option1garage.com.au (I think) have a O/S twin plate for 33/34 that I was hoping would fit my car but it wont for around $400 it would need new plates(around 300 -400 each from www.otomoto.com.au) Id say but it still a good buy.

umm nup it wont ones push the other is pull type? so you need to buy a kit to convert it. Adz I was taking about the clutch Im still after one.

yep its a old school oil only cooled one

Nup it wont or so Ive heard(from FBI) without buying a few extra bits which are expensive so just sell it to me if you want.

I recently got a t3g turbo for my r32 and Ive done a search an not found much info on it Im wondering if anyone knows what power I can expect I was told around 220 kw atw max by the guy I got it from. I have also taken it to Bill at Ats here in adelaide and was told it should flow 210 max at 1.2 Bar Im just after some real life numbers or power rating from hks.Thanks

should be costing me $1200 as long as nothing needs to be fixed

After a long wait my 4 door arrived here Friday from Brissy I picked it up from Toll on Sat got a temp rego for the day and took it straight to the compliance place about 10 min down the road even though its auto at the moment Im in love I even got it a little sideways I cant wait for the compliance to be finished so I can start work on it. Yippee

My mate bought a white ceffy the other day (bastard) anyway it has a speed alert chime anyone know how we can get rid of it (I did a search)

been quoted $1800(stock clutch) at fbi if that helps (is this a good quote?) make sure you get a good box I went through two crap boxes in my sileighty before going to D1 and getting a low km s14 one fitted

yep I just booked my 32 4 door in with Best the lady I talked to was great customer service makes all the difference costing me $1200 + parts only if they need replacing.

Im looking at getting one of these for my 4 door 32's Rb20 when gets here and was after some info on max Kw max psi etc

Your a champion thanks a lot set to arrive on the 12th if I had used my brain I would have work out that they owned the ship and loked for there web site