Jump to content
SAU Community

tyra skyline

Members
  • Posts

    36
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by tyra skyline

  1. my oil temperture gauge in my center consule on my gtr33 v spec stop working ,since i repace the engine from overhaul can some one let me know what to look for to solve the problem
  2. my oil pump stop working today , is it easy to repair with the engine in the car , any ideas is helpfull.
  3. hello i have a gtr33 v spec , in the morning when the car started it misses ba dly and idle very low at 800 rpm, but when the temperture rises the idle goes up to 960 rpm when driving on cruse at 2000 rpm on vacume the car will pull back and then go again.i have since then change plugs ,check coil , change gas filter, clean afm , if the car is driven hard no problem only if cruseing and cold start.what is the problem. can anyone help
  4. can i change from a pull type clutch to a push type clutch on my gtr34, where can i get the clutch & repacement kit to buy
  5. i am looking for a r34 gtr workshop manual that contain 4 wd system & a-lsd system where can i buy it from
  6. if i want to run 1.3 bar booste, what timing should i run, should i retard timing from the cas , and then advance it from the power fc
  7. ok i will try that setting . at presant my static timing at the cas is 20degrees,at 1.2 bar my ignition timing is as 800,12,16,20,24,28,32,36,40,44,48,52,56,64,,68,72, 80,84,88,92,rpm 20 ,25,25,26,26,26,25,25,25,25,25,25,25,25,25,25,24,2 4,24,24,timimg map is this a good timing map for 1.2 bar booste, my mods are hks ,2530 apexi fuel pump & fuel regulator 680 cc injectors arc intercooler, hks intake pipe kit engine is still standard.
  8. if my standard timing on the crank angle sensor is at 20degrees advance and the values in the timing map in the power fc max 45 degrees what is the total timing,? is the 20degrees advance at the crank add to the 45 degrees in the power fc to give you the actual max timing.
  9. my gtr 34 4wd and a-lsd lightcoming on, with lost of 4wd system where can i look for the problem
  10. The Reason For Changing My Apexi Power Fc Is Because The 444cc Is Maxing Out At 100% Juty Cycle And I Have Install 680 Cc But The Car Is Running Rich , I Have A Pc Commander But Dont Know How To Program The 680 Cc . What Should I Do
  11. I Have A Gtr 33 Vspec And Have A Microtech Ltx 12 To Install If I Remove My Original Computer Will My 4 Wheel System Still Operate , What Will Hapen If I Remove The Computer
×
×
  • Create New...