kotttte
-
Posts
8 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by kotttte
-
R34 manual conversion wiring
kotttte replied to Ashley33's topic in R Series (R30, R31, R32, R33, R34)
Need help with the neutral switch asap. speedo and reverse lights are working. neutral switch - dont know what to connect -
Fine fine, I'll look for an oscilloscope, hard to comeby around me
-
speedo, traction control and hicas works, looking for a new cluster atm. When I get a new one and the ecu still doesnt see the input something else is at fault. I also checked for continuity in the wire that goes from the cluster to ecu and it was fine. Could it have gotten grounded some where and the ecu fried something in itself?
-
okay okay. spamming this wont help. But the cluster seems to be at fault. Can i use a manual cluster even when i still have automatic trans? how about gtr cluster?
-
did a automatic transmission selfdiagnostic, got code 2. witch is vehcile speed sensor 2. where is this sensor and how to test it out? Somebody has to have some knowledge on this problem
-
can anybody with more electrical knowledge teach me how to read the input of so called wire from behind the cluster?
-
wire seems to be intact from behind the cluster to ecu. cluster pin 30 (vehicle speed 2pulses) to ecu pin 29 (vehicle speed sensor 2)
-
hicas doesnt seem to work, no light tho. also when idling and staying still and spinning the wheel around the engine light goes away and comes back randomly.
-
R34 GTT 1998, engine light code 14 speed sensor. Came out of no where. Randomly stiff and light power steering. Speedo works so if i've read correctly the speed sensor inputs cluster first and the cluster gives information to the ecu. Nissan consult on a laptop saw no speed sensor input from the ecu. Is the speed sensor bad or is there something else wrong. Wiring diagram for the whole speed sensor to ecu?
