Jump to content
SAU Community

Djw085

Members
  • Posts

    6
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Djw085

  1. It didn’t misfire when I first started it it started misfiring after I ran it for 20 mins then changed oil and filter (as directed) ran it again and the miss started shortly after that. It had next to no compression in the 3rd cylinder.
  2. Is it possible for a rebuilt motor to loose compression in one cylinder after around 40 mins total running time since build due to a leaking injector washing the cylinder?
  3. No luck as yet, going to compression test all cylinders on the weekend, the mechanic seems to think it’s a washed cylinder from a leaking injector I may have had, the motor has only run maybe 30mins since being rebuilt so don’t know if it’s possible that can happen after only 30 minutes of running? Anyone heard of this?
  4. Swapped over with another coil which resulted in the same cylinder not working. I had a spare igniter there too and swapped that over as well only to find the same problem, I also pulled the insulation off the coil wiring harness to see if the wire was broken but nothing. #3 spark plug is the only one clean as if it’s not biting fuel. I’ve also taken the coil out and tested the spark plug for spark and it has spark so I’m guessing it’s fuel but I’ve changed injectors with no luck either
  5. Nizzpro rebuilt it, I've had it down there since installing it and he told me it was the tps, but I've replaced and set the tps and it's still misfiring, done a compression test and it all checks out fine.
  6. I have an r32 skyline wa auto but converted to manual, just installed a fully rebuilt motor and can’t get it running right, #3 cylinder is not firing but I’ve tested the injector is pulsing when running, changed injector just in case, swapped the coils which made not difference so that ruled out coils because the miss remained in #3 cylinder, replaced the plugs to brand new ones, checked the wiring harness which had power, checked earths and injector leads, any ideas on what it could be?
×
×
  • Create New...