Jump to content
SAU Community

RRob

Members
  • Posts

    332
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by RRob

  1. Isn't there some dodgy china copy z32's getting sold now. I had first hand experiance with one and heard of another here in perth.
  2. Tap rover covers. Or Buy an adapter fitting and have the thread machined down to the size of the hole and bash them in.
  3. I'm not familiar with earl's, but the in the speed flow range teflon fittings are black and blue (instead of rubber braid fitting's being red and blue).
  4. Use teflon braided hoses and get no smell whatsoever.
  5. 1 is earthed. Other is trigger(when you push the button).
  6. Dead stock(internally) VQ30 here making 340rwkw. Hasnt done too many k's yet, but so far so good..
  7. Easiest way out of this dilemma would be to use your wiring loom on the 33 motor and plug in a turbo ecu..
  8. Same as VL and r31.. Plenty of those around
  9. Wiring is easy...
  10. 340rwkw.. Very tame tune in it.. Testing the reliabilty of the stock motor..
  11. Heres a pic of mine. Some details... To4z SM4 Big fuel system Stock internal's
  12. .4v - 4.0v is the normal operating range.. 4v being WOT
  13. 12.7@107.9mph Engine mods where safc, t/back exhaust, fmic and ebc set to 13psi. Was in a commodore ute tho and tuned by NIB at the time. And for reference they are very similar in weight..
  14. Just for comparison... R32 GTR PFC DJetro, 9.1mm 256 HKS cams, Front pipes, Exhaust, Filters, Earthed fuel pump, Sard 550's and 14psi boost usually... 410 kays to the tank...
  15. 2 volvo lift pumps intank feeding the surge tank in to 1 044... Works mint bit i went overboard and run 1/2inch fuel lines and sard reg too...
  16. Fuel pump and attessa pump chong.... I'm fairly sure
  17. Got one too located in morley... 0438936774
  18. It get's 12v from an ignition source and is activated by an earth driven by the ecu...
  19. Wernt you the guy plowing kerbs on Sat nights CalaisTurbo cruise?
  20. In the loom it's the blue wire with a white trace. Needs a 12v supply. Also powers the o2 sensor and idle control valve..
  21. Probably something so stupid like lack of oil in the engine..
  22. Yes the common wire between the injectors is a power supply. The other's a earth driven by the ecu to control them.
  23. Ive heard of this happening on a 25 due to 1 washer missing of the sprocket. Bolt bottomed out they thought it was tight.
  24. Go Gear is ossie park. Got it all in stock
×
×
  • Create New...