RRob
-
Posts
332 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by RRob
-
Question For The Efi Guru's Out There. Aftermarket Management
RRob replied to GTRNUR's topic in Engines & Forced Induction
What engine is it for? Cant't you use the standard distributor for sync purposes. Then just use a crank trigger. -
Cam timing?
-
Also is the wiring correct? Does the VCT solenoid click when you just touch the throttle?
-
I did a stock rb25 last week that had a faulty standard BOV. Was leaking so the car wouldnt make boost or power.
-
It's B reg. I dont see the problem? B reg car's do wear number plates....
-
Scrat from ice age.
-
Car @ Targa west this weekend.
-
0.4v closed 4.0v open. Fairly sure its the middle pin on the TPS but cant remember exactly. Unless you have a PFC then check it in "sensor switch check"
-
The are 2 different reo's. Standard and N1 you can cut the slots into the standard one easily.
-
They fit pretty good just make sure the reinforcement is pulled all the way forward. You need the gtr reo anyhow.
-
Did you supply the adapter plate? Can't blame them then if china failed.
-
All star is doing nis-tune. I'll find out what model cars are available though....
-
PFC overpriced for plug n play with perfect driveability? You can hardly call the Emanage an ECU cos it's only a piggy back system of the standard ecu(just like a safc). My 3c
-
Could i interest you in my 32 sedan? Or another line of crack?
-
Seriously you can't put the pfc and emanage in the same category. The emanage is just a glorified safc.
-
Pop the grommet out the front of the cas and tap the shaft out with a hammer and punch gently.
-
I'm fairly sure they are only $140 although i havnt bought one for about a year.
-
Option to pay on the day if there's spots left?
-
The wholesaler had supply issues with falken into australia so gaev them the flick.
-
BTW i use verriers in bayswater and they have been the cheapest and best. All mine are for 25 box swaps where the yoke need to be changed. But i still use a 2 piece.
-
But in all seriousness is the car your enquiring about really in need of a expensive shaft like that?
-
I dont like the idea of a 1 piece. Obviously nissan didnt either
-
Theres heaps of suppliers. Thompsons tyres usually have them in stock afaik
-
Their other r35 is silver afaik.
-
Whats the application. Might help us get an idea of what your getting or need.
