Aphonechanh

Thanks for the input all. I don't plan to track her or anything. Just a daily drive. I'm shooting towards 400hp or so. My tuner can work with an apex but he recommended the Haltech platinum pro as the power fc is outdated he said. If apex is fine then I'll shoot for it then.

I know it is outdated and there are plenty better options but more expensive. I recently was offered a deal on one for 500$ US dollars. My question is is it still worth to buy or hold off and save for a Haltech etc... I have an RB25det r33. If I hold off and save for a more expensive one, it'll be about 6 months give or take. Opinions?

Nevermind. I found the answer.. thanks for the clarification.

Thanks for the confirmation. So how about the differences? Is it fitment issue or just different styling between s1 and s2. Meaning if I get an s2 hood for my s1 car.

If a 95 will work, then why on eBay i always see 95-98? Did they change it in the middle of the year 95?

So I need a hood for my 93 r33 gtst. I've been reading in groups in fb about what fits and different answers came up upon reading. Some said a s1 and s2 hood are different near headlights. I know gtr are different also. Then some said all r33 gtst hood are the same. Can someone clarify this for me? I'm seeing that s1 hoods are hard to find and I see mostly 95'-98' for sale. If I buy one for my 93, what will it end up looking like? i don't know if this is the right section to ask this. Sorry there.

?I would but the community where I live strictly forbids any work on any cars or trucks. Security is always patrolling and will write a 300$ fine. I can take to a garage but they'd charge for it. That's why some of these questions may seem easy to anyone with space to work on their cars but it's the uptight community i live in. I apologize for these simple questions.?

can anyone tell me which is for my vehicle? The image without the flange is the one I ordered but the one pictured with the flange is from a 300zx tt. I was told by someone that the the one with the flange will fit also. Can someone shed some light on this for me? If both will fit, what is that flange for?

When driving at higher speeds a feel a vibration through my steering wheel that I'm trying to eliminate. So far I've replace tires and control arms on all 4 sides. Now I have to replace the rear wheel bearing. I'm hoping that eliminates it. Afterwards I'll take her on highway to see if it dissappears. They just mentioned it at a garage about the ring and I wondered if that had to do with the driving. If you guys say there is no gap then I won't bother touching it.

This is a picture of the rim.

They actually came with the car from Japan when I bought her. Does putting in a ring eliminate any vibrations at higher speeds? What does the ring do?

hey everyone. As stated in the title, is there a center ring that is suppose to be in there around the hub so it is flush with my rim? Someone at the shop says yes I need one. If not a ring, then is it fine the way it is? I'll order one if needed but what is it called?

Ok. I do have a warranty on the alignment. If I were to take her back to redo the alignment, is there a rear setting I should be shooting for or just make sure she is in the green?

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green.

Oh ok. My daily is an S2000 and it doesn't feel like that at all.

Hello everyone. So I installed my Hicas delete kit.(picture below). After install, i had my alignment done. The bushings are the ones I installed that came with it. Now when I drive and shifting through gears, i feel my rear end wanting to fish tail a little. Is this normal? I'm driving an r33 gtst. Just want to know so I don't take her back to garage to get them to look it over again.

I'm swapping my fuel tank from an s15 into my r33 gtst and would like to know if the sensor in the image is the fuel level sensor? The tank in the picture it's the S15 btw.

Thanks. I wanted to make sure because they came from Japan and sending them back would be a pain.

Thanks.

Can anyone confirm if these will fit into stock gtst 1993 r33? I know I should pull the pads to see myself but my car is at a garage at the moment and I'll be driving this weekend to drop them off to get them installed along with other parts. Before I drive there, I'd like to know before hand. First picture is for the front and second is for the rear. Thank you.

I've been searching but like I answered the previous post, the Ebay seller said r33 was produced in 95 not 93. Here it's my vin#

Tie rod ends for all 4 corners. I asked a guy on Ebay I'd they will fit a 93 because he listed them as 95-98. He replied that r33 were started year 95. If it's A 93 it can't be an r33?‍♂️.

Sorry if I sound dumb, but I've been reading on the r33 and buying parts I need for maintenance. I have a 93 r33 gtst. When I'm browsing around and looking for parts I notice some sellers will list parts as "95-98" r33. Being that I have 93, will those parts fit my model year or no? Sorry if this has been asked before but skylines are new to me and reading up on them are on a as I go basis. Thanks all.

Thanks! I emailed kudosmotorsports and told then my situation, if they can confirm what I asked, I'll definitely grab an s14 or s15 fuel tank. That's probably my better shot at a replacement tank.

So I've had no luck in finding a fuel tank for my r33 gtst. BUT! I've read that the s14 and r33 share the same fuel tank. Can anyone confirm that this is true before buying an s14 fuel tank? The international shipping for a fuel tank from the uk to Florida usa is almost 800$!! So if I read the information is correct, an s14 will fit. Anyone can confirm this, if it fits, will there be any mods need to be done to make the tank fit? Like fuel pump, hoses, bolts e.t.c... I figure I can easily get an s14 fuel tank quicker and cheaper than an r33 fuel tank. Help please!