Hudeani_r32

I'm more than confident in doing the work. Done most of the work on the car myself. And the kit is plug and play if I had the stock wire as it has the same plug. Even if it wasn't the same plug I can happily change them to ones that match. The problem is I don't have that wire to do so. And would rather not cut up a perfectly good harness after having problems with a hacked up one from its life in Japan! What I want to know is exactly where on the loom the cable for the gtr stock boost solenoid is. And if I can in even fit the gtr loom from the fuse box side into my gtst and it work. Everyone seems to be ignoring the questions I have asked! I know where it should be fitted And how to fit it. But I don't have that option so need advice on what else I can do.

Would rather not have to cut up the ECU harness that's why. Would rather of used the factory wires if they were there. But as they are not I'm asking for help on other options. Would rather replace my broken stand alone boost controller than hack up the harness lol. Only went for the Apexi as I thought the garage had fitted the whole gtr loom as I supplied them with it including the fuse box side of things. But looks like they haven't. Even though the battery cables have been changed for the new ones.. that's why I was confused in not seeing the factory 2 pin for the solenoid.

Where can you plug that into though? As the plug for it on the ECU is already used with the other map sensor.. and I am running a hks t51r single .

I don't have any 2 pin wire there to do that! That's the problem. The gts doesn't have the same boost solenoid as the gtr. Has one over by the turbo. But as that loom as been changed for the gtr along with the battery connector loom I don't have that either. All there is is that 3 pin cable where the correct 2 pin should be!

I know there is! What I am saying is I do not have that connector on my loom! The map sensor is already run as I have a d jetro.

Yes. I have the boost controller add on for it. That's what I'm trying to fit! It has the t shape plug on that plugs into where the factory boost solenoid would be but I'm missing that. That's the issue I'm having.

Where would run it to though? Splice it into the ECU plug?

Hmm not good news. Although all of the cables on that side were changed also from the stock I believe.

This 3 pin looks like it's coming from the same place that the cable it should be does and us about the correct length but a gtr ones are 2 pin I believe... Only thing I can think of is it's not a 32gtr loom... But if it's not then what is it? And surly it wouldn't be working in my car? VID_20200919_190243~2.mp4

Yeah I replaced the stock GTS loom with what I was told was a R32 gtr loom so should have that t shape plug. But there is nothing there! Not even any cut ends or anything! Rather confused. Has anyone for a wire diagram for where it should be and what part of the harness so I can have a closer look to see if it's been removed or is missing or anything?

Hey guys. Trying to find out where the original boost solenoid cable is on my r32. It was a hcr32 but I have put in a rb26 with a single turbo . The loom was supposed to be from a 32 GTR but I can't find the 2 pin cable anywhere on it! No signs of anything being cut off either! Only have a spare 3 pin cable coming from roughly where it should be! Any ideas as I am stumped!!