A31Drifter

sold pending payment.

My mistake guys Rear tyres are 255 and fronts are 235 Stock 350z size 17x7.5 +30 front rears 17x8 +30 sits flush with r33 guards. Interstate shipping costs $100-$150 depending on where you live. Cheers, Darell

Cheers thanks for clearing that up.

Fs Set of Nissan 350Z Rims immaculate condition with Federal 595 225 at the front 235 rear all more than 60% tread. Have them on my r33 gtst perfect offset. Price $600 Pickup Glebe NSW Cheers, Darrell 0430517133

Hey People Today I have for sale is a set of 18x7.5 5x114.3 +42 and +48 offset Volk Racing SE37 rims in Volk Bronze (very rare). They are Forged monoblock and are the same weight as the Famous TE37. Tyres are Yokohama db 225 40 18 all around rears have some camber ware at 30% front are around 40-50% tread I have them on My STI at the moment but it fit my R33 with no problems. Will also fit s14/15. 1 rim has a very light gutter rash. Pickup from Sydney Price $1200 Cheers, Darrell 0430 517 133

Will you take $200???

Where are you located might be interested in the auto box if you are in Sydney.

you have Pm.

Hi mate I'm interested in the cooler does it come with piping kit to Suit R33 gtst??

Have you cheked your BOV might have a leak if its aftermarket. change to a plumb back style and you wont have any problems

Hi all have a HKS SSQ2 with fittings for sale been used for 3 weeks then decided to go plumb back. Paid $380 @ just jap with recipts. sell for $300 Please pm or SMS me 0410300413 Pickup in Sydney CBD or postage Aus wide for around $15

Hey guys I have some parts for sale R32 GTST RB20 Ap Engineering power Fc for sale with hand controller in the box Very Rare to find $1000 ONO. SOLD Mick via sms R32 GTR injectors (bought second hand unknown condition but looks OK) $150 SOLD to Vsute R32 GTR injector Rsistor pack (Needed to use GTR injectors in an RB20) $150 SOLD to Vsute RB20 coilpacks good condition $80 Thanks for the overwhelming response to my post but ALL PARTS SOLD PENDING FULL PAYMENT PLEASE DO NOT SMS OR PM ME!!! Sorry if i have not responded to your SMS or PM as there are just too many.

If you need the measurements to modify your Auto shaft to Manual there is no point all you need is to do is boltthe rear half ofyour Auto drive shaft to a front section of manual skyline there is a bolt in the middle.

I have one sitting around to suit RB20E Auto yours for anything interesting.

Thanks Guys found one from Viva garage but its about 2 monts wait

Hi there guys My bonnet us starting to look a bit beatup does anyone know where to find a carbonfiber one from in Aus for a reasonable price. Thanks

should be WKO mate same as my 180sx the paint shop should have a computer to look it up if he took the time.

i always thought the 4WD chassis have a hump in the front rails to clear the drive shafts

Hi there i have a R33 gtst s1 all parts avialable minus engine gearbox. damage to left hand front. due to the number of parfts available i cannot post prices so pm for parts available and prices Sorry guys someone has bought the whole car complete !!!!! please no more Pm. Thanks

well im using a bm55 from a nissan leapod with a z32 master cylinder. My r32 brakes felt a bit spongy with the stock gear. Any master cylinder with 3outlets can fit or you can use the Z32 and tap out the blank fitting hole.

I think the dash misht have come from a Thai or hong kong Ceffie their speedo reads more.

Thanks that will save me heaps of time running around to see if the parts fit or not...

Hi guys I finally decided to replace my stock auto open diff with a s13 R200 with a cusco 1.5 way lsd centre but with closer inspection the R200 diff is alot larger and the bolts on the rear housing do not line up. Has anyone done this conversion yet if so your help is greatly appreciated. Also I have herd that the R32 rear cradle lines up to the ceffy if so will the s13 diff fit the R32 rear cradle ??? also does anyone know if the S13 cradlle fits aswel. Thanks

Ill give you $1000 for it let me know if you are interested

Hi is the motor in running condition apart from the the missing parts also do you have the loom and ecu.