DualQuadDave

LOL, thanks for the help. I'll just figure it out myself. You sure you aren't in South Florida with that attitude?

Help me out with that, as it's certainly not clear. In most wiring diagrams, the continuity will have an arrow on the circuit showing flow of power. There is nothing on the standard Nissan diagrams that I can see. It shows ground, but it's a shared ground and not clear.

I have looked at the diagrams and they show the wires, but not the continuity. I just need to know which has the power going in. It's important that I know which is proper as if I run power the wrong way, I may or may not fry the switch.

Hi all, I am working on an R32 GTR and have run into an issue with the AC. When I got the car, it had most of the AC components, but not functional. I had a new clutch put on the compressor and checked the diagnostics on the dash and all seem good. When I charged the system, it's not pumping. Clutch is engaged and compressor spins fine, but not pumping at all. At the rear of the compressor, there is a plug with a red wire and green wire. Neither have power. I think this is a high pressure bypass valve, but currently is not receiving power. I want to know which wire is the power input and what voltage? If someone can unplug their's and check, it would be appreciated! Thanks!

Sent you an email. I have 2 sets of RB26 Valve Covers I am selling.

I have 2 complete RB26 heads. One stock, the other is a near fresh rebuild w/ Apexi cams. I am in South Florida-USA, but have shipped engines/parts to AU many times. Let me know if you still need and I will send pics. Thanks!

I have 2 sets, one set complete w/ spark plug cover and one just the valve covers/timing cover. I can ship anywhere. I am parting a R32 Skyline in South Florida-USA. Have 2 RB26 long blocks, stock turbo's, GReddy turbo kit, etc. Message me if you need anything else. Pics attached, let me know if you need more. Thanks!