CeffyNSW

Guys At that price, I would be interested! Regards

mjay We stopped a had a look at a very nice red R35 GTR on the ground floor as we left, does that count? Great to have a look at all the cars. Bit lazy as didn't talk to everyone there! Andrew

Hi Guys Saw the pictures from the last meet in HPI. Hope you are happy to see a 4 door 350GT. Regards Andrew

Guys I pulled one of those boxes out of a ceffy with ABS and assumed it was for the ABS as I have not seen it in any others. Regards

Guys Still looking. We have a budget of $150, thought that would be enough for a decent used kit. Regards

Bump

Hi Guys Am after a front mount intercooler piping kit for an R33 gtst. Am in Wollongong. Thanks

I can only tell you my experence, when I put my RB25 in I bought most of an R33 front cut including radiator. I tried to fit the radiator and it was too tall so I sold it and bought an R32 one. Think they said you can pack the supports down to make it fit. It wouldn't take too much to try it.

The R33 radiator is taller so will not fit straight in. R32 gtst is a straight fit and thicker than the ceffy N/A one. Thought there used to be a thread on it with someone said they had fitted an R33 one somehow, but couldn't find it. Hope this helps.

Hi Guys Can someone please check A31 Cefiro ECA31 000083 Regards

Hi Guys Can someone please check A31 Cefiro ECA31 000083 Regards

Thanks for that, I will ring them on Monday

Hi guys Trying to work through some issues on my V35 Skyline. Don't suppose anyone knows of a Nissan dealer in NSW with a Consult III? Regards

OK guys Too much to ask by the sounds, my apologies. Working through some wiring diagrams and it should be OK. Regards

Hi again Still working through the conversion stuff Could you please find part numbers for V35 5 speed auto 3.5 VIN is PV35500185 engine loom Z33 5 speed auto 3.5 VIN JN1GAAZ33A0010030 (gave you it all, just in case) engine loom, ecu and gearbox Z33 5 speed auto 3.5 VIN JN12AAZ33A0250072 (gave you it all, just in case) engine loom, ecu and gearbox Regards

From the manual the ecu is located behind the glovebox compartment, perpendicular to the fire wall, with the bcm behind the kick pannel. The above numbers do look to line up with other info I have for ecu's. I was looking for some consistency between 5 speed auto and 8 speed auto with bcm and ecm, so I could easily convert to 5 speed. This does not seem to be the case. Thanks

not sure what a body control module is, what does it do and where located ? mmmm, runs lots of the stuff in the cabin... fuel pump and other things In the V35 it is located behind the passenger kick pannel. Hope this helps

Guys One more favour please Can I get Body control module part numbers for the following V35"s 5 speed 3.5 VIN is PV35500185 (auto) 8 Speed 3.5 VIN is PV35400281(auto) Thanks

Thanks very much, has helped me out heaps

Hi Guys Not sure this is the site to get some help with part numbers, would be greatly appreciated. Could you please find part numbers for the following parts and V35 Skyline VINs Engine control module (ecu) Gearbox 5 Speed 3.0 VIN is HV35202223 (auto) 5 speed 3.5 VIN is PV35500185 (auto) 8 Speed 3.5 VIN is PV35400281(auto) 6 Speed 3.5 VIN is PV35450505 (manual) Trying to see if can convert an 8 speed that is broken and can not be replaced to a 5 speed auto. Thanks, I hope

Thanks for the advice guys, this is good to know! So has anyone successfully moved away from the cvt8 by converting to 6 speed manual or other?

Hi Guys My first time on the V35 site, usually hanging around on the Cefiro end of things. In the process of buying Mena's V35, with the dead CVT8 in the boot. So this is one example of the CVT8 failing, assume it was in one of the of the links that were put up. The VQ30DET complete with auto is one option I have been looking at, but seeing as it is for my wife, I am likely to try and convert to a 5 speed auto out of a 350Z. This will depand on how difficult the electrical side of things gets. Ofcourse the other option is to go for the 6 speed manual, which will not be too hard to get up and running, I hope! Would love to know a little bit more about the Leopard VQ30DET, a serious drift friend says they are going in a number of drift cars now as they are almost indestructable with standard internals. Not sure where it would sit with the emissions required for a 2003 V35 and ofcourse would require an engineer's certificate and more wiring mods! Any advice here would be good, without hijacking the tread.

Thanks again Adrnln Those post bring back memories from when I did my RB25DET + box conversion. Will go and see about a one peice tomorrow. It is either that or just modify the rear tail shaft. Regards

Thanks Adrnln Had not thought of doing that, just as easy as making up the rear section. What is better? Why? Regards

Guys Only other option is to modify one to fit. Thanks