ni*cK*

have a pair of R33 front rotors... overall excellent condition except they've got brown shit all over them coz they been sitting in my garage for 5months. Was going to use em for my 180sx as a brake conversion but ended up using R32 ones. 296mm front rotors ==> $100 frim

guys.. i'm open to offers

Hi guys, just cleaning out the garage and got some parts i need to get rid off: R33gtst Front Rotors. 296x30mm... Good condition, plenty of meat and dont even need machining - they have been redrilled to fit 4stud as well as 5stud. - $$$150 Nick

any idea how much i should be asking???

but that's the thing... i NEED THE SMALLER ROTORS

Thing is that i already had these rotors redrilled to 4stud (which cost me $100). So if there is a cheap way of gettin the R33 discs to be cut down to R32 size i'd rather take that then redrill the rotors again.

Any idea how much that would cost??? coz that's sounds like an alright idea. and i'm assuming u mean that i should cut the caliper down to size.. am i right?

I was using R33 disks and these calipers (which i was told were R33 when i bought them)... and the 2 bolts on the caliper were literally 5mm or so too far out. on my mates R32.. as if the disk was too large... and as they looked identical to his R32 calipers that's how i came to this assumption

So you reckon if i get some R32 calipers i'll be fine??

Thing is i bought these to put on my friend's R32 as an upgrade as the disks are larger... however these just dont bolt up. Is there any nuimbers or anything on it that tell me what they are?

pic posted

Hi guys.. i recently bought a set of R33 calipers and rotors from a person on these forums.. but for somereason the calipers did not bolt up to the R32 suspension. The only reasonable conclusion i could come to is that the calipers were from an R32 (the look identical.. only difference is the numbers on them. How do i tell the difference between the two?? will it help if i post a pic of the calipers. EDIT*

Hi guys, just cleaning out the garage and got some parts i need to get rid off: R33gtst Front Rotors. 296x30mm... Good condition, dont even need machining - they have been redrilled to fit 4stud as well as 5stud. - $$$Make me some offers R33//R32 Rear Calipers... not 100% sure what they are... if anyone knows how to tell the difference PLEASE let me know1!! - $70 also have front set of calipers for an R32 (I THINK!!!) I bought them as R33 calipers.. but they didnt bolt up to a R32 with R33 calipers... if anyone knows how to tell PLEASE LET ME KNOW!!!! $$$Make me some offers or whole set for $430

they fit... 4x114.3 and 5x114.3.

Reply sent

if someone wants just the disks then sure thing... otherwise i dont want to get stufck with parts. So if you find someone who wants em u are welcome to grab em. The rear calipers i dont really care about..

I have a set of R33 Calipers and rotors that i was planning to use for my brake conversion... they are no longer necessary. THey are all in good condition... the rotors shouldnt require machining... One thing to not is that the rotors have also been redrilled to suit S13 stud pattern (4x114.3) so these rotors will fit both 4 and 5 stud nissan vihicles (redrilling cost me $100 and was done professionally). Looking for $500ish: 2x front rotors (296mm ones) 2x front calipers 2x back calipers I will also consider a swap with a little cash adjustment for Either R32 or Z32 Calipers and rotors. I only need the fronts.

Just wandering how to tell the difference between R32 and R33 gtst calipers???

Still looking guys...

WTB: Looking for front Calipers and Rotors off an R32 or R33 This is for a 180sx so R33GTS disks would be preferred... but i could easily get the others redrilled so open to ALL offers THanks