Sheriff Wan

Hi all, So after returning from my overseas trip yesterday, I decided to take then line out for a drive... After getting on to the main road doing 60kmh. Looking to slow down for the slip lane onto North Rd I then decided to go for the brake. I push for the pedal and it hits the floor! What the f**k, again i try and again hits the floor!!!. Luckily enough I managed to stay calm and pull the handbrake avoid a cyclist and pull up on an angle just shy of the oncoming cars!!!!!!!!!!!!! Anyways all is well, the girlfriend got a little shock though My question is this: No brake lines are leaking and there is no brake fluid around the calipers, it seems to have cmoe from the cylinder/booster area - There is no fluid in the system. I am assuming the master cylinder/booster are the culprits? What kind of booster and master cylinder will fit an R32 GTS-t ? In other words can I get a R33/34 GTS-t or GTR or 4 door etc. Or will only R32 GTS-t ones fit Any help would be greatly appreciated. Sorry for the long winded post just thought I'd share CHECK YOUR BRAKE PEDAL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hey, I need something in Melbourne though... Thanks.

Hi all, I'm looking for a brake master cylinder & brake booster to buy for an R32 GTS-t. Items must be in Melbourne and be in good working order. I can pick up if need be. Thanks for the help. You can contact me on 0422206869 - Steve. Cheers,

- WTF Removed seats!!!!!! - Your turbo will last 5 runs if you run sand through it to clean out the sludge first (just pour it in where you fill the oil) you should know you serviced your own car!. I think you can get HKS Super Port Sand (Do as search to confirm name though) Make sure though you run some wax thourgh the engine after the sand so it will polish the engine internals and strengthen them an turn them into JUN ones PS If you really want to win when your car gets over 100kph grap the shifter with both hands (steer with a knee) and pull really hard into the "R" gear, all of a sudden the car will run a 9 second quarter... its a Nissan secrect that id share with you so you can keep your car.

Mate if your in a R33 GTR what a massive change from a Honda... GTR's will launch best from Redline and a little bit of feathering of the clutch Hopefully your not getting beaten by Hondas Cheers

Rims are sold.

Off sets as follows. Front +12 Rear +25 I will let you know tommorow if payment has been received. Thanks for the interest. Cheers

Sold pending payment.

Yep the rear is slightly larger than the fronts

Hi all, I have some 17", 5 stud Stern lightweight 2 piece race rims. They have no tyres on them at present. Im not sure of the exact offsets etc but they will fit an R32 with 225/45/R17 tyres on thr fronts and 235/45/R17 on the rear with no problems. The fronts have a slight dish and the reas even more!!! as the pics show. Good looking 17's if you wanna upsize from stockers I have attached some pics , they have a little bit of gutter rash but are very light weight racing rims popular in Japan. Reason for sale.... I already have wheels on my car!!!! Anyways im in melbourne looking for around $550. Happy for you to come past and check them out. Feel free to call me on 0422 206 869 or PM me. More than happy to negotiate on price.

Sure can but youll have clearance issue with intercooler pipng etc etc My RB20 doesnt hit full boost till bout 5500rpm however if you get a good tune and a decent set of cams you could bring it down to 4000ish. RB20's will rev to 9,000 if you want them to but under 8,000 safer. Really depends on budget a well setup RB25 will see 250rwkw, full boost by 2,500 and bounce off red all day long..... again budget issue.

Gents im running MOTUL 300V Chrono 10w40 and can say its awesome. Its a pain having to buy 2 bottles to start with as you can only get it in 2 or 4 litres but its well worth it! Im not sure about 15w... but the 10w it works for me BTW I have an RB20DET with around 180rwkw

Why not fully synthetic??? I use 300V Chrono and its awesome... thats fully synthetic.....

Anyone have any ideas... This has me stumped, I have tried looking for clogs in the feed line but that is fine. Any help please

Yep after the housing, around the cartidge it seems to be leaking slowly, there is no huge cloud of smoke under full load etc, little bit of black as the tune is rich. Do you think it may be an oil feed problem? I have a braided oil line Any ideas??

Hey all, Just been noticing latley that my turbo is leaking fromthe rear housing... I dont think it is the seals as there is no blue smoke under load etc. I have checked the drain line and there is nothing blocking it etc.. any ideas as to what i mite be? Possibly blow by or crankcase ventilation?? just some ideas. Any help from the turo gurus would be greatly apprecitaed. Cheers, PS I know the drain pipe is off

Is that also the bit that says never open when hot?? If so how does it come off. Do you unscrew it from the plenum? Mines stiff as...

Anyone know where i can find this thing on an RB 20det?? A pic would be great. Cheers.

Thanks gents.... Mine does not have/did not have one in there and i just assumed as it leaked a little... Ive got some gasket paper ill fix it up now. Thanks again,

No no not the oil FEED line the oil DRAIN line I'm talking about the part that drains oil back to the sump...

Hi all, Just wondering if there should be a gasket from where the turbo joins to the oil drain line? Anyone in the know, help is appreciated. Cheers,

Sounds like fuel pump. It wouldnt hurt to look at your coil packs etc.

discopotato thank you. Do you know if it is ball bearing and what the wheels are?? Its currently making about 180rwkw on 11/12 pound just basics

Added pics

Hi all, I have my turbo off and wondering what kind of half cast it is. Just want to find a little more about it. Markings are as follows: Garrett front housing with the following: A/R 60 HKS Rear Housing with the following: 064 And the Metal Tag thing says: AL 6028J GT 2530 - 63T 446179-21 I have a feeling it is a hybrid 2530 Anyideas turbo gurus. The turbine wheels look standard.