Cozzamb
-
Posts
18 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by Cozzamb
-
yeah timing cover is back on the cas works fine
-
not sure how i would verify TDC for cylinder 1 as i’ve just been doing everything off the workshop manual the engine has not been rebuilt all sensors are plugged in
-
yeah as far as i know all 3 of the marks are lined up (i’ve checked about 4 times because of this issue) i will take it apart tomorrow and post it on here when turning the car on from cold i have to use throttle but idles fine. when revving when driving it almost spatters and won’t go much higher then 3000rpm i have factory cam gears the harmonic balancer has definitely not spun
-
i have man about 4 times still can’t figure it out
-
i have a rb25de and have recently done the water pump after it blew but now the car is really down on power i put the belt back on and lined it with all the marks and even set it to 15 degrees with a timing light but it still won’t rev could it be the belt tension? not sure what to do
-
i have a 1996 gts-4 and i want to get a front torque gauge and i have fond a somewhat cheap triple gauge out of a stag just wanting to know what do i need to do to wire the front torque gauges in and also want to know if i can remove the gauge and put it into a singular pod instead of the triple set up
-
does anyone know if it is possible to convert a rwd rb20det to awd i have a awd sump on my 25de in my r33 gts4 and need more power while still being “p plate legal” would it be a straight swap or would i need some sort of adapter plate
-
i have a 1996 r33 gts-4 and had a roadworthy inspection the other day guy said he couldn’t pass it because of the rust near the rear k frame any suggestions on what i can do to fix this other then “sell it” because gts-4s are hard to come by these days left is passenger right is drivers side
-
my washer bottle on my r33 won’t run and i have no clue what it could be when i touch the wires with a multimeter the wipers move and when i switch it on with it plugged in nothing changes the motor on the bottle works because i got it to run once and have tried with a few different bottles does anyone know what this could be could it be?
-
the one on jetspeed says only to suit gtr series one and two but where it says model says gtst so I'm not sure how would it fit both series 1 and 2 arent they different?
-
yeah sorry auto correct front bumper*
-
just wondering if there are any options for a gtst series 2 400r front number there only seems to ones selling for a series 1 and i’ve herd fitment looks whack if i have a series 1 front number on a series 2
-
i’m after a LH r33 weather strip retainer nowhere seems to sell them and my car is missing it completely if anyone knows where to get one i’d love to know the part number is 76871 22U00
-
yeah i did take it off but i don’t know what could be wrong as there isn’t many pictures to reference from
-
hey guys i have a 1996 r33 gts-4 and i assume the last owner has been playing with the horn and it’s not working i’m not too sure why the horn pad feels almost springy and feels like it doesn’t sit right is there anything else i would need to tighten apart from the two bolts on the side and or plug in? here’s a video of what it looks like 67842678749__9E03EA58-0C80-4CDB-83EE-5BE6F2D07AC4.MOV
-
so hypothetically i could buy an exhaust system and it should fit or isn’t to much of a hassle to make it fit?
-
i’m not too sure i’m looking at exhaust systems for the gts4 and it says not suitable for 4wd models and i’m wondering what the difference could be
-
hi, does anyone know if the stock r33 gts4 exhaust if different from the stock gts exhaust if so what is different?