Jump to content
SAU Community

Chris72

Members
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Chris72

  1. Chris72
    That is the issue I found I get power to relay when it closes the switch it should send power to feed fuel computer and pump. There should be 2 points of power to relay one from ECU and one to earth. When relay closes not getting voltage from ECU side. So that's my issue. Ordered a new Haltech ECU for it.
  2. Chris72
    You must think I am stupid. This is a new vehicle to me. It doesn't list where relays are at and yes that is what I been using is a f**king test light and multimeter. Now that someone pointed me in right direction to relay yes I two points of power to relay but not a 3rd point which comes from the ECU side. So really get over yourself thinking your all that shit and better than anyone else on repairing a vehicle. Geez.
  3. Chris72
  4. Chris72
    Perfect thank you. I found it.
  5. Chris72
    Yes and that fuse is good. I tested that with a test light on both pins of the fuse. So where exactly is the fuel pump relay located at. Because I am not seeing it at all. And most are saying it's green and behind boot of drivers seat.
  6. Chris72
    I checked all the fuses and they are all good. Yes there is no power get to FPCM. No power to the fuel pump but the fuse inside are also good.
  7. Chris72
    ICM ignition control module or igniter for coils
  8. Chris72
    Hey folks new to the community but just bought a GTR R32. I have literally racked my brain on all this. But lost power to ICM, CAS and the fuel control module. Everything else has power but those any ideas? Or think it's a relay that controls all 3 of them. It is dyno tune with a Haltech ECU. I did replace ICM and CAS thinking would fix issue until I also found that I was not get fuel pressure.
×
×
  • Create New...