GKTECH

The RB25 kit is the same as the R32 GTS-T further up the page. This fits much better than the one you have hosted EGA41T as you can see where there is an extra pipe in our kit on that one there is not and the angle's aren't right where the 2 pipes meet up. Musky - Bar and plate cools better, whereas tube and fin flows better. It's a catch 22 :S P.S I'm leaving for Taiwan in a few hours and won't be back until Wednesday week. I may not be able to reply to queries within the usual 12 hour period. Sorrt for the inconvenience. Greg

The R33 GTS-T, R34 GTT and Stagea all require the same mods listed above. Overall it's quite an easy kit to install and will certainly fill your gap in the front bar Greg

Assuming you are talking about the R33 GTS-T kit you have to remove your piping that connects to the intercooler, remove your front bar, get a whole saw and cut a 3" hole just below the washer bottle (the exact location is in the installation guide), mount the intercooler with the provided brackets, mount the piping and silicon hoses, check to make sure the top pipe is not touching the fan blade (some people do say it touches slightly, others are fine, if it does touch you will need to trim the blade slightly accrodingly) and then tighten up the clamps once everything is fitted. The vacuum hose which was on the stock intercooler pipe is now to be T pieced off another vacuum hose (the hose that comes from the wastegate). Overall the kit is not hard to install. If when installing your get into any difficulty we're available 7 days a week to help over the phone or email, PM, sms etc. etc. Greg

bump

I think by rear they mean rear lip (eg. front/rear lip) Greg

And replied mate. I'll speak to you when you get back into Australia cheers, Greg

Keep the orders coming guys. Still over 100 kits in stock!!

I am still in China but things are running as per usual and all orders have been sent out within 24 hours of receiving payment, I don't know which day your kit was sent out because I don't know who you are.. If you could send me your information I can check it for you on our order system. cheers, Greg

Hi, you can see more pictures of the intercoolers on our website here: http://www.gktech.com.au/products/?id=57 We only have the bar and plates at this stage. cheers, Greg

Please send me a PM with your order details. To get from here to Austrlia wide can take up to 6 working days. cheers, Greg

More intercooler kits have just arrived!!

Keep the orders coming guys!! Plenty in stock for all makes and models.

I've got 4 from my GTi-R (same as the R32 GTR's). They're just been cleaned and flow perfectly. I'm after around $300ish. Greg

The first post has now been updated with more pictures

Complete Front mount intercooler kits to suit all Major jap cars ONLY $449 - LIMITED STOCKS The front mount bar and plate intercooler kits are constructed entirely of high quality 6061 aluminum and the intercooler core is 100% vacuum brazed. The polished aluminum end tanks are hand TIG welded for a perfect fit. The ambient fin pitch has been adjusted to provide an optimal fin density of 15 fins/inch. This gives the intercooler excellent flow properties as well as a large cooling surface area, and the efficient Bar & Plate core takes advantage of these properties. The piping is all mandrel bent and contains only 1 weld mark throughout the whole kit. The kit includes 1x 600x 300x 76mm intercooler, polished aluminimum piping, all brackets, nuts, bolts, tripple layer silicon hoses, clamps etc. The kits are designed to be installed DIY and are very easy to install. For installation help please email us or give us a call. Features & Specs: -All TIG Welded 6061 Aluminum, polished end tanks -100% Vacuum Brazed Core -High Efficiency Bar & Plate Construction -3 popular Sizes available -Inlet/Outlet: 3inch -Low pressure drop w/ only 0.2psi at 15psi of boost -Tested CFM: 1020 CFM -Fin Pitch: 15 Fins/Inch -Four Threaded Universal Mounting Points FREIGHT: (all items are sent out by registered post with full insurance) VIC: $30 SA/NSW: $45 QLD: $50 WA/NT: $70 IN STOCK NOW READY TO BE SENT OUT OR PICKED UP!!! To order please send me a PM or send an email to sales@gktech.com.au

Fuel pump is back on the market and gauge is now sold..

Updated again. Hybrid coolers are all gone and oil cooler kit is back up on the market!! Greg

Updated

Hey guys, I have a heap of stuff taking up room. It all needs to go. Hybrid GT Spec intercooler, Tube and fin - ALL SOLD OUT - 100% genuine and 100% brand new - RRP is over $500AUD!! - $299each Greddy V-SPL intercooler - Pre loved - few dints but overall quite good condition - $500ono Apexi PowerFC with hand controller for RNN14 GTi-R - BRAND NEW - 100% brand new, not taken out of the box. - $1450ono Oil cooler, oil filter relocation kit and lines - BRAND NEW - Oil filter relocation kit is made by perma-cool and the oil cooler is made by Setrab [made in Sweeden] - All rubber lines are included - $350ono Bosch 040 fuel pump - BRAND NEW - Good for 300awkw's. Awesome upgrade. - $230 Just added: - Sard R2D2 blow off valve - $220ono - BRAND NEW - Infinity Kappa 6x9" speakers - $250ono - BRAND NEW - Pioneer Satellite speakers for in car use - NEW RELEASE - RRP $569 - sell for $200ono - BRAND NEW - ground wiring kits - BRAND NEW - $25 each + $10 delivered (or pickup from VIC) - Only 1x Green left - Blitz Pod and adapter to suit Z32 afm (can easily be adapted to suit any other afm) - $80ono - Pre loved - Autometer sportscomp volt gauge - $50ono - SOLD - Kenwood top of the range MP3 headunit - RRP$1299 - $200ono (won't turn on for an unknown reason) - SOLD Greg

Hi Lee, $299 pickup from Werribee, Victoria. I have 150 kits arriving on the 4th of April + a few days for customs. cheers, Greg

Know of anyone with 1 laying around (brand new). I need one asap

SOLD OUT!! 150 kits on order and they should be here in the next 2-3 weeks.

It's around 580 x 290x 75mm 2.5" end tanks. It's 100% genuine and looks like something out of a porno film compared to the bar and plate coolers I sell. Greg

$25 via registered post with full insurance. Plenty in stock now ready to be sent out cheers, Greg

Stock on hand is correct as of 10:15PM 8/3