Wheezy

I might come along for a drive......There is plenty I can learn from this I will be calling soon

That exhaust manifold is a work of art....

FYI $4700 should get you the same kit as I.....

Yup was an Aussie catalogue, they are sitting around all over my house LOL You called the wrong autobarn's then , I can tell you who to call in VIC, SA, and QLD (I'm not sure what state your in) we just got rid of a heap of trust parts frigging cheap.....(autobarn as a whole) GCG is the new distributer. FYI: Trust Type-R gates (and other types IIRC) come in various sizes.

$900ono

grandmasterb : Spec R in the kit is 42.7mm, there is also a 51 and 61mm gate and some smaller ones. (Trust 2008 catalogue) If you want a 1bar gate spring it can be ordered VIA an autobarn or GCG (if they will deal with you direct).... If they are not in stock Im sure they wont take more than a month from Trust. Raz: I think some cam gear and a slightly more aggressive tune could fetch 300 easily, but would be leaning on the engine. I would personally only do it for a dyno figure and pull the tune back again

I too have the Type R gate (I have the pro L2 Kit), however I thought it was only 42ish mm in diameter.... I might check what the catalogue says tonight (and actually check the gate when i cbf)

Standard Trust waste gate (42.5mm) with 0.7bar spring IIRC Blitz ID3 (Dual Solenoid) EBC

Autobarn Narre Warren.....Ask for Justin or Jarrod

What sort of power is it making with the 10cm?

We could do this with a T67 for shits and giggles considering this car and a T67 RB25 live very close to each other

Both contain harness and EMU. As is said $1000 ono The harness has had the correct pin swaps and is ready setup to go, and a base map is setup.

Item: Greddy Emanage Ultimate + RB Harness (Suit RB20/25/26) Age: New Condition: New Price: $1000 ono To Fit: R32 / 33 / 34 Location: Melbourne, Vic Contact: Jarrod 0414 185 031 [email protected] Comments: I have for sale a brand new Emanage Ultimate that I intended to use on my Skyline. Due to having a HR31 with cable speedo the factory ECU could not pick up a speed signal I was running into a load issue above certain amount of AFM voltage / injector duty the factory ecu would cut. I did not have the time to remap the ecu and the cost of it might not have fixed the issue. Therefore I purchased another ECU as I needed the car ready in 3 days from the time of the tune. I regret not being able to use this ECU however. If you are in VIC I can help organise an install and tune at Status Tuning if you also wish. Cheers -Jez

Profec S and Profec B SII (current models) have the same solenoid, just a different interface

http://www.skylinesaustralia.com/forums/in...t&id=172954

Let me know a time and a date and I will bring it down I also want to see if this plenum does anything, either way its friggin easy to change plugs and injectors

Nice car do they make them for men......................I just peed a little

Finally had my car tuned last night.... Mods applicable are: Trust/GReddy TD0620G-L2 8cm Pro Kit front facing plenum 550cc sard injectors R32 GTR PFC (D-Jetro) Bosch 023 in tank fuel pump FMIC Exhaust Blitz single plate button clutch / flywheel Trust/Greddy Iridium plugs Splitfire Coilpacks 1.25bar of boost 7,000 rpm redline, rev limiter at 7,200 277.1rwkw on a Dynapack Dynometer Makes me happy in pants Edit: Found the sheet already here http://www.skylinesaustralia.com/forums/in...t&id=172954

I hope the offenders are caught swiftly.....that is a Huge blow to a company that supports this community. I'm scared of what information those PC's contain also. All of those customer details, credit card numbers, bank accounts etc....I hope it was all secure...

Trent, your pics fail, but I can just make out my car in the background

Nissan Fast?

AC you and I both know that I can get them direct from white line anyway...sall good

Cheers for the pics mang. Gives me something to think about, do you have any rear sway bar pics?

Ah that right. Whiteline et al purchased selby's years ago. Might be worth a phone call

ja. Whiteline rear sway bar for HR31 is actually inferior the the stock hollow 25mm ones. Its a 20mm solid. That simply does not compare to a 25mm sway bar hollow or solid. Cheers. I will await pics