Ak brar

Alright ill check vaccume again and see if i can find something

Easy ill check again So its not related any cas timing issue?

Checked all hoses looks good just removed cas and replaced rocker gasket when i start this happened

Hi everyone any help? Revving upto 3k Checked tps 0.48 & Throttle working alright. adjusted throttle bolt also tried unplugging tps but still same Nothing changed still revving same IMG_1261.mov

Hi everyone any help? Revving upto 3k Checked tps 0.48 & Throttle working alright. adjusted throttle bolt also tried unplugging tps but still same Nothing changed still revving same IMG_1261.mov

Appreciated man thanks for helping 🙂

Thankyou i have microtech l16. Was on s2 25 that will work on my 20 with igniter ? just need checkout some pinouts right.?

So there’s no issue. I can use s2 ecu on s1 or rb20? With factory igniter setup right?

Hi stupid question rb25s2. Don’t have igniter is that igniter built in coilpacks or in the ecu

Easyy ill check thankyou for help mate 🙂

Got it but i have microtech lt16c was on 33-25 with harness patch and plug thats the reason i was asking. That ecu will work or i have to do some pinout modifications on the patch to work on rb20-?

Alright got it so i can’t even run 33- rb25 ecu on 32-20?

I heard only rb25det loom fits on 20. others need modifications.

What needs to be done?

Hi guys need help can i swap r33gtst rb25 engine loom into r32gtst Rb20?

Yeah I will but which studs i need to buy? 25 or 30 and length?

Hi everyone I purchased r32 with 30/25 300kw on 98 im planning to turn it on 85 i was changing rocker gasket and noticed there are std studs 😞 so can i just turn it on e85 with changing them ? And keep it under 400kw ? Is it safe ? does anyone using std studs upto 350kw or 400kw?

Yeah @Duncan I’ve ordered new switch and I’ll replace soon And damaged wires too im looking for an auto electrician in mean time iam stripping parts to check that other wires are okay ! and thanks for your replies @Duncan @GTSBoy

Hi everyone im from melb vic. ive got r32 there’s an electric short circuit issue idont have any knowledge about electric stuff if anyone can help me that would be awesome so the issue is when I turn the headlights on car burned the wire under the dash which is headlights wire thats wire came from under the dash nd connected to the driver side computer that wire is red colour with blue trace so the wire is naked fully burned from starting to the end then i checked under the driver seat loom found same wire cooked and naked i followed thats wire and remove the centre console again i found same wire naked and burned everything was ok when i last time drove it and she keep blowing the fuse ive checked lights were ok no issues rear lights checked ok i cut that wire from near computer beside fusebox and checked again then lights were working and no short circuit but only thing is not working breaklights it only work while pressing peddle so i try to connect That wire again and checked i found same thing happened wire start burning so ive checked what i know if anyone know wuts wrong or anyone lives in melb near west If someone Have knowledge about this please let me will be really appreciated thankyou