Connorrd

Yeah I’ve been eyeing it for a while was just a matter of trying to see if I could get it going without it but I’ll probably get a copy and a diagnostic connector and check it out at this rate plus I suppose it’s good to have

Ok I’ll look into that I think - I was considering buying a scan tool also like nisscan and I’ll see what’s up with the O2 sensor someone else in person suggested I should replace it or at least give it a proper cleaning. Luckily theres a local skyline group so should be able to get in contact with someone and see if they can lend a hand

I was looking into a Nistune ECU would it be better for the AFM one or should I look into a 25det and Nistune that? I do have plans to make power hopefully in the future but no point in trying to make power when the car doesn’t run well in the first place

Luckily it hasn’t been modded a lot pretty sure only thing previous owner did was a CAI and the straight pipe - just hoping to get it running smoothly again

Interesting ok I’ll look into that as an a new OEM MAF is around 700 USD. And it’s just based on how the car is acting such as very low mpg and a rough idle for reference

Interesting I’ll try replacing it and installing a factory maf and seeing how that goes

Meant O2 spacer forgot the word any reasonable places to find them? Or do I have to suck it up and pay the 500

I meant O2 spacers but forgot the wording lmao I have BKR5E-11 Copper set to 1.0 and I am going to be cleaning them soon just wondering if anyone else had any ideas. I’ll try out the cat thing also see if I can find one on ebay

Hey all I have an 99 R34 sedan - RB25DE NEO and it’s running rich/poor but I’m not sure why. It was running poor when I bought it and the only thing the PO did before hand was drop the cat which he said caused the issue (Unsure if that’s true or not) The car has a chop while idling but once it warms up properly it runs smooth but still has the CEL. I ran the code and it gave me a MAF issue so I used sensor clean which didn’t work then replaced it with an aftermarket MAF but from a reliable seller which gave me code 55 but it still runs poor. I’ve also replaced the coil packs and checked the spark plugs and raised the O2 sensor out of the exhaust to allow it to get more air but still nothing. Any help would be great as I’ve spent a lot of time and money trying to diagnose this issue. Here’s a vid of it idling hope someone else has had this issue and can help fix it thanks