NVMYLH

anybody felt their car NOT going so well after puttin 1 of these kits on?? friend of mine recently put 1 on his 33 4 door, and he swears 1st/2nd gear do not pull as good as before, but 3rd/4th gear go like all hell! Had it dyno'd to check the afr's and its running well rich, and only made 165rwkw on 11psi! changed the plugs to bcpres 7's (i think it was, 7 heat range thats for sure) but it still does not go that well in 1st/2nd. Any ideas? He's has read somewhere that a SAFC might help a fair bit?

Bump.

Hi all, i'm after a elbow from the standard cooler piping from a r32. A mate from tafe gave me 1 which i modified for 1 part of my piping, but i need another. Its pretty close to a 90degree bend, and it has a foam/rubber boot thing around it with sections cut out. It should be 60mm ID which is what my piping is (not 63mm or 2.5inch), im sure theres a few hundred of these things lying around, if anyone has a spare could they PM me, or email me at [email protected] (also if you have a pic so i can check it). Thanks Craig Johnson PS i'm east of melbourne, postage may be needed.

Hey Mr rbman, i tried to pm you, but i dont think my PM system is working properly, anyways heres what i tried to send. i'm after a rubber elbow which i think is from a rb20det. A mate from tafe gave this elbow that was almost 90degrees, but it had this big foam boot sort of thing around it with sections cut out. Anyways, i'm after another 1 of those cause the inside diameter is damn close to 60mm which is what i need. If you have 1, could you send a pic and what sort of price you might want. Send any pics to [email protected] Thanks

Hi dlen77, i'm after a rubber elbow which i think is from a rb20det. A mate from tafe gave this elbow that was almost 90degrees, but it had this big foam boot sort of thing around it with sections cut out. Anyways, i'm after another 1 of those cause the inside diameter is damn close to 60mm which is what i need. If you have 1, could you send a pic and what sort of price you might want. Send any pcs to [email protected] Thanks PS, i tried to PM you this but i dont think my PM system is working properly, nothing goes into my "sent" folder

Still looking for this stuff guys! Somone must have an actuator lying around.

Hi, i heard these are a better actuator than a normal vlt, and i need a actuator to finish my engine conversion. I know a rb20/25 might need some modifying to fit a vlt t3, i should be able to do it. So if anyone has 1, could you please let me know! Also need a cat convertor, i dont know what size a standard rb25det cat is, but i'm looking for something around 2.25-2.5". maybe even 2.75. I will only have a 2.5inch exhaust in future so idont think i'll need a 3" cat. Pretty much anything that will pass a engineers cert./RTA inspection, and be able to flow 200rwkw minimum. Any help would great! PM or email me at [email protected] or sms/call 0400816403. I'm east of melbourne, near ferntree gully/belgrave. Thanks Craig Johnson PS, also need a yoke and uni (pretty much the front half of a rb25det 5spd box tailshaft) I need 1 for my rb25det 5spd box and will be modifying it to suit my 9" diff.

Hey AnFz, would separate the actuator? I need 1 for a engine conversion. If so, could you email me at [email protected] or PM me? Thanks, I'm also in melbourne too, near Belgrave/ferntree gully

Damn it, lol, thanks guys but i managed to find 1 at an importers in Adelaide, $100 brand new. Thanks for the help!

BUMP

If they are supplying the diff/engine and trans, then it'd be pretty cool.

Hey Predator, i just rang that place and the lady reckons they dont have anything for an r32-r33 because there an import. Thanks for trying but!

Hi, i need a r33 clutch slave cylinder for the push type clutch. If anybody has 1 PLEASE let me know, i've looked everywhere! And cant get a hold of this 'All Clutch and brake' place in Qld, no1 seems to be able to get 1 around here. I'm east of melbourne, willing to pay for postage aslong as i can see some pictures etc. Thanks Craig

Hey mate, all you really need to mount the engine is some Castlemain Rod Shop engine mounts. Cost about $150 i think, which is pretty good i reckon, no mucking around then, just drops straight in then. But you will need to make a crossmember for whatever gearbox you want to use. check out www.gmh-torana.com , there is a couple of people doing rb30-25 conversions on there.

G'day Malecki, would that slave cylinder suit a rb25det 5spd box? do you have a pic of if?