wegs

R34 GT-T Front Cut or Wreck with mostly complete engine bay Looking for a front cut or wreck mainly for the engine bay. Needs to be GT-T and could be auto or manual but prefer manual. If you know of one sitting around anywhere please drop me a line. Predictably wreckers don't want to sell something to me as a whole. Cheers Wegs

Hello, I'm chasing a set of factory Nissan V35 coupe springs, preferrably in adelaide but am willing to pay postage for interstate items. If you have some or know someone with them lying around please PM or email me, could even be a jap wreckers. I would also consider hiring them if owner doesn't want to part with them but doesn't need them for next couple weeks. Contact: PM or [email protected] Thanks. Wegs

Anyone who's worked with fibreglass before will understand just how much time, effort and materials went into this box design. It's now just taking up room so thought i'd offer it up to anyone interested. The box shape and angles look a bit strange in these photos but that's because it was custom designed to slot perfectly into the space behind the rear seats. Unfortunately i don't have any pictures of finished product in the car but have included one of the build. It fits with the standard trim in place. Notes of interest: - moulded to fit into the area above the fuel tank behind the back seat. Uses space which is normally wasted to minimise impact on boot space. Doesn't interfere with spare tyre - The box is 100% sealed (tested with water) and measures 42L which suits many 12" subs for a sealed enclosure. Really tight responsive bass from this box. - The 3mm MDF skin was used to hold the complex initial shape, but the FRP gives it incredible strength and a low weight of under 10kg - Box allows for a strut brace to run through the middle! This was to suit a nismo strut brace but should work with others that use round tube brace (not the flat bar type). - Amp mounting surface has been recessed into box so you can have the sub and amp flush mounted with a panel to cover everything else. I didn't get around to building the panel but can show you how (i'm an ex qualified stereo installer). If you want an easier solution you could cover the box in carpet (which is very easy to do ) and it would still look professional and neat. Please email me on [email protected] rather than PM if you're interested. Pickup available anytime in next couple weeks. Cheers Wegs

SOLD Pending payment

Looking to sell my RB26 GReddy clear timing cover. Never used. Has a few small surface marks which are hardly noticable. Price: $60 Contact via email is best: [email protected] Thanks Wegs

SOLD: FRP heat shield tubing (length x diameter) – One piece 400mmx7mm, one piece 400mm x 30mm & one piece 1200mm x 17mm. (The 1200mm length is Earls Flame Guard hosing & retails @ $10/foot): $SOLD PRICE DROP: S15 Wheels excellent condition, zero gutter rash. 2 x Falken Ziex 225/50/16 95%, 2 x BobJane Xenon Z7 225/50/16 99%. Tyres alone worth over $400. Sell lot $325.

SOLD: D1 Spec catch can, as new – only removed from packaging to find it wouldn’t fit, brushed steel finish, ~800ml capacity: $SOLD SOLD: Nissan 5L oil 7.5W30 - unopened: $SOLD

RB26DETT GReddy clear timing cover, new but has a few very small surface marks from sitting around: $80 R32 GTR RB26DETT Cooling Pro silicon radiator hose used 2000kms. Top hose has been cut to allow for inline temp sensor. If you plan to use an additional temp sensor in future, you could use a small tube join in the mean time: $40 D1 Spec catch can, as new – only removed from packaging to find it wouldn’t fit, brushed steel finish, ~800ml capacity: $40 FRP heat shield exhaust wrap 1 ½ rolls: $80 FRP heat shield tubing (length x diameter) – One piece 400mmx7mm, one piece 400mm x 30mm & one piece 1200mm x 17mm. (The 1200mm length is Earls Flame Guard hosing & retails @ $10/foot): $30 R32 RB20DET alloy front strut brace with black ends: $30 K&N performance oil filter new HP-2008. Suits number of Nissan’s and Subaru’s: $15 GTech meter: $125ono S15 Wheels excellent condition, zero gutter rash. 2 x Falken Ziex 225/50/16 95%, 2 x BobJane Xenon Z7 225/50/16 99%. Tyres alone worth over $400. Sell lot $400. Nismo seatbelt pads, good condition: $15 Nissan 5L oil 7.5W30 - unopened: $20 Motul 5L Turbolight 4100 oil 10W40 - unopened: $35 Work Royal Chrome wheel nuts with McGard lock nuts 12x1.25. As new condition, only tightened twice using quality hand socket, no marks: $250ono Contact me via PM or email [email protected]. Other pictures available for rest of the gear Thanks Wegs

SOLD (No Edit button available to modify original post)

Up for sale is my barely used Blitz I-Color Spec R DSBC. I also have the optional Blitz temp and Blitz pressure sensors included which are worth $120ea. I only recently removed the plastic cover from the I-color screen (after install) so the screen is like new. I didn't shorten any of the wiring or vacuum line during the install so this is good to go in any car in virtually any location. Together with the included sensors this is a powerful control and monitoring setup for any turbo car. You get the best in boost control along with monitoring of boost, revs, speed, power, oil pressure, and oil OR water temp. You can even graph boost against RPM which is great for mapping multiple boost channels and holding maximum boost to redline where it would normally fall away. With more sensors you can add up to 5 more data readouts including fuel pressure, A/F ratio and anything else that outputs voltage signal (the I-Color can be calibrated to suit any brand). Besides keeping your interior free of gauges you can also set audio & visual warnings on each channel. Price: $925ono Contact via PM Cheers Wegs

These wheels have now been put on ebay: http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=180333846494 Thanks Wegs

Nah not a stupid question at all. It's an R200 diff... so yes it will bolt into the subframe. But you would run into problems if your skyline has 5 bolt drive shafts and/or ABS. I don't know about the skylines.. but some of the 200sx's had 5 bolt driveshafts and some had 6 bolt driveshafts. You would only know if this is a good option for you by looking at the number of bolts where your driveshafts meet the diff. This sale is now on hold pending payment.. but i thought you might still benefit from the info above cause it helps if you know what factors to consider when buying a diff. Cheers Wegs

Item: This 1.5 way Cusco LSD had only just been installed in my s14 when i bought it 3 months ago. Works great but I'm not making use of it so am changing back to the more subtle nissan LSD. Details: Not getting any knocking noise people often complain about with mechanicals. Diff has 6 bolt output shafts. Advertised as a whole but willing to remove centre for shipping etc. Pulled the back off last night... everything looks good. Oil was fresh and clean. Price: $700ono Contact: PM or reply here Location: Adelaide, NEast Suburbs Thanks, Wegs

Up for sale are my mint condition Recaro seats out of my S14 which were factory fitted to the EVO6. Difficult to find in this condition, pretty much flawless. I usually keep them covered with slip on seat covers. Sole reason for selling is to change to red Recaros. It's criminal because I'll probably have to settle for some in not so perfect condition Black material is suede, sides are a durable layered blue/black material. The front of the seat extends for leg support. With the right rails these are street legal/ADR approved. Surprisingly I have also found these seats have a built in tilt forward mechanism. Just needs some levers added to make use of it. Location: Adelaide, Nth East Price: $1500ono Contact me via PM or reply here for more details. Shipping may be considered. Thanks Wegs

Oil Cooler is now sold. Thanks to everyone who expressed interest. Regards Wegs

Price Dropped to $750ono.. Keep your oil doing a better job for longer. Worthwhile investment when you consider the protection and insurance it provides for your RB26.

Item: Greddy Oil Cooler and Filter Relocation kit to suit R32 GTR Condition: Excellent, used for 5000kms. Small damage/leak from shed accident was professionally repaired and then pressure tested. Location: Adelaide, Nth East Suburbs Details: This is the NS1610G core which measures L299mm x H233.2mm x W50mm. Includes all the original parts from the Greddy kit to bolt on including original packaging, instructions, brackets, bolts, thermostat, cooler, adaptor plate. I bought this kit for my GTR after not being happy with the factory temps which reach +100deg in summer under load. After install temps came right back to 75deg under normal conditions and a peak of 85-90deg under high load in summer. Contact: PM or reply here Price: $850 (current buy price direct from japan is $1375!) Thanks Wegs From PerfectRun website: GReddy OIL COOLER KIT (OIL FILTER RELOCATION TYPE) GReddy Oil Cooler Kit helps to prolong the life of your engine components and engine oil. Hard driving causes higher engine temperatures. Normally the factory oil cooler is a small water-cooling device sandwiched between the oil filter and engine block. This taxes the cooling system for the engine. GReddy oil cooler is an excellent alternative. By using special inner-fin core design, the oil cooler increases oil capacity, decreases oil temperatures, and extends engine and oil life. This product also offers a special feature to allow you to relocate the factory oil filter for easy maintenance. Also an internal thermostat allows the engine to be warmed up quicker and prevents it from over-cooling. The efficient core and durable stainless steel-braided lines insure good flow and leak free installation.

These are now sold. Thanks for everyone's interest. Wegs

R32 GTR Build date: 12/89 (Imported under 15yr old rule) Gunmetal Grey 109,720kms I have spent a lot of time and money over past 2 years making this one of the cleanest and best driving R32 GTR's in adelaide. I have purchased a new ride to occupy my time so my GTR is now up for sale. For a brief period earlier this year I added boltons (turbos / ecu) to increase power but I found it was no more fun to drive than the old setup and would be more reliable and fuel efficient etc. So I reverted back and spent the money on a paint job instead! Have focussed a lot on maintenance and replacing anything that showed signs of wear with a few custom touches here and there. Everything from mechanical to asthetics is in excellent condition Performance / Engine Fuel pressure guage New Power Enterprise SS timing belt Jasma cat back exhaust (new Nissan exhaust-gearbox mount) K&N pod filters Turbosmart type 3 Dual port BOV (plumbed back) Aftermarket single plate clutch (proven to handle 300rwkw) All rubber fuel lines replaced with high performance EFI hosing & clamps All cylinders have high compression within 5psi of each other New NGK spark plugs Radiator flushed and new seals installed Mines plug in ECU 200rwkw on Boostworx dyno before Mines ECU install Audio & Electrical Sony CD player with matched fusion Splits Front and Rear Blitz Dual Turbo timer with boost/peak readout Custom Xenon retrofit using S15 Jap spec xenon projectors. Ballasts hidden Angel Eye parking lights, only visible when Xenons are off. Every interior and exterior bulb replaced with LED’s including indicators, instrument cluster, brakes. Dash switch lights replaced with 3mm LED’s to match dash LED’s Autowatch alarm with digital battery backup, central locking, boot release, dual immobiliser and multiple sensors. This has been meticulously wired into factory loom so it can’t be traced. Alarm module can’t be found without dismantling much of the dash. Car start not wired for safety reasons Suspension / Brakes Tein Super street coilovers - still under warranty Front and rear Whiteline HD adjustable swaybars Whiteline Hicas Lock bar Polyurethane full replacement diff cradle bushes (entire subframe removed to install these) Whiteline Rear upper adjustable castor and camber bushes Whiteline Front upper and lower adjustable camber and control arm bushes ADR Braided brake lines Near new pads all round with discs machined recently, Motul dot 5 fluid Brake master cylinder re-sleeved (Passed Regency with current setup) Interior Very good condition overall, everything works Custom leather retrim around gearshift, handbrake & steering wheel Razo leather gear knob Nismo 320km speedo Body Immaculate. Fresh respray in factory gun metal grey New seal on inside of rear guard join (common area for rust on skylines) De-badged (will supply or install badges with sale). Other A/C overhauled with reconditioned pump, all new seals, new Nissan A/C lines & receiver/dryer. Cost over $1000 Fuel Economy is very good. 500km/tank around town. No rust. This GTR hasn’t had a hard life like many of this age. Major service performed 8,000kms ago Oil changed every 3500kms with Motul Turbolight 4100 Always garaged, driven on weekends. Many spare parts included including exhaust, airbox, factory ECU, Price: 19,500ono Has just come out of the paint shop. Rego and Insurance lapsed while i was getting the work done so I am keeping it at the paint shop until I find a buyer and will then put 3 months rego on. Contact me with reply here, on PM or call 0413 250 250. Located in Golden Grove Thanks Wegs

I have used pack n send in the past to ship wheels. If i wrapped these up in cardboard including tyres i would estimate shipping to be $120. Do you have any other couriers in mind? Cheers Wegs

Price is now negotiable, am open to offers. These are taking up valuable shed space! Will also include chrome wheel nuts and lock nuts to suit.

Open to sensible offers. Tried doing a search to see what market value is but they seem pretty hard to come by 2nd hand. New price on Nengun is +$900 each before transport.

On hold pending sale to chalon

Item: Attessa Controller Age: Purchased start of 2008 in last batch ever made Condition: New Price: $350ono To Fit: All GTR's, GTS4, Stagea Location: Adelaide, can ship at buyers expense Contact: PM for more details Comments: No longer available to buy new. Details and history for this device can be found here: http://www.skylinesaustralia.com/forums/Fs...ers-t69301.html Still have original package/manual. Never got around to fitting and now plan to sell my GTR and don't want it to go to someone that won't appreciate or make good use of it. Should be able to get pics up tomorrow. thanks Wegs

Item: Nismo LM GT4 18" Wheels Age: TBA Condition: Excellent Price: $3200ono To Fit: Skyline GT-T, GTS-T, 200sx etc Location: Adelaide Contact: By PM or email [email protected] Comments: Advertising on behalf of a friend (who no longer has his skyline and is no longer involved in the scene). As photos show very good offset for RWD skyline or 200sx. Tyres are worn and can be removed for shipping interstate if required (approx $100 for shipping). Cheers Wegs